CONTROL RETROFIT KIT BALBOA VS501Z Duplex 4 Button , 2 PUMP ,5.5KW,115V OR 230V, LIGHT AND CORDS

(No reviews yet) Write a Review
SKU:
HTP50-KC217-Z
Shipping:
Calculated at Checkout
  • This is a Balboa Retrofit Complete control system that will run (2) Jet Pumps or (1) Jet Pump and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Duplex 4 Button Topside and Black Out Plate, a Light wire and bulb Kit needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
  • This is a Chart of the different Pack Kits and what they will and will not operate.
  • This kit comes with a 4 button duplex topside with a Black Out plate that measures 8 9/16" long x 3 1/2" wide to take up the space if you are replacing a larger topside system. This is a Balboa Retrofit Complete control system that will run (2) Jet Pumps or (1) Jet Pump and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Duplex 4 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
  • This Kit plumbs to a 2" Pipe that measures 2 3/8" Outside Diameter or you can plumb it to 1 1/2" pipes using a reducer bushing. This is a Balboa Retrofit Complete control system that will run (2) Jet Pumps or (1) Jet Pump and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Duplex 4 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
  • This kit comes with a LED Light Bulb and Harness. This is a Balboa Retrofit Complete control system that will run (2) Jet Pumps or (1) Jet Pump and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Duplex 4 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
  • This System comes with a Ground Bar. This is a Balboa Retrofit Complete control system that will run (2) Jet Pumps or (1) Jet Pump and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Duplex 4 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
MSRP: $961.99
$619.99
— You save $342.00

Description

This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (2) Jet Pumps  or (1) Jet Pump and a Blower, (1) Circ Pump if equipped, and Ozonator and a Light.

It comes with the pack which includes a Board, Heater and Tube and Sensors, a 4 Button Lite Duplex Topside, a Light wire and bulb Kit needed to operate the items the system will run.

Note: If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system.

Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.  

When you purchase a Retrofit Kit from us you will have access to call us when installing for advice that is part of your purchase.

This complete retrofit spa pack VS-501 that can be hooked up 120/240V

Amp Cables Not Included.. 

Overall dimensions are 11" Tall x 15" Wide x 4-1/2" Deep

Retrofit Kit 54220-Z Includes: 

  • 5.5kW heater with Balboa's patented M7 technology (no pressure switches)
  • Spa Control System 
  • Panel Model - Lite Duplex Panel Dimensions (in) 6.32 x 2.25, Panel Dimensions (cm) - 16.05 x 5.72
  • Adapter Bezel Blackout plate 8 9/16" long X 3 1/2" Wide
  • Other Parts Included - one LED light assembly ih Cable
Supports (but does not include):
  • 2 speed pump (120V/240V)
  • 1 speed pump (240V) or Blower (120V/240V)
  • Ozone Generator (120V/240V)
  • Spa Light (12V/12W)
Features & Benefits

 

Replaces failure-prone mechanical pressure/flow switch
Can be plumbed to either suction or pressure side of pump
120/240V convertible power
Custom plastic enclosure
M7 flow/ temperature sensors
Rigorously tested
US & Canadian safety approvals

Optional Devices

• 120V / 240V Circ Pump*

* = Ozone and Circ Pump must be same voltage.

 

View AllClose

Related Products