Manifold Hot Tub Spa Dead End (14) 3/4" Outlets with Coupler & Glue Kit Video How To

See the Informational videos here first. This Kit is a (1) 2" Dead End X 2" Slip X (6) 3/4" Barbs manifolds and (1) 2" Spigot/Street X 2" Slip X (6) 3/4" Barbs manifold, (1) 2" Spigot/Street X 2" Slip X (2) 3/4" Barbs, manifold Connect Barbs and clamps, Glue with a Coupler Kit. The Kit consists of 14 Barbs with (3) Manifolds total (2) with (6) 3/4" Barbs and (1) 2" (2) 3/4" Barbs manifold totaling 14 Outputs, (2) 3/4" Plugs to cut the manifolds down to 12, 11 or 10 outputs, a 2" Coupler, 6" of 2" Soft Pipe, (28) 3/4" Clamps, 4oz Blue Glue and 4oz Purple Primer and 42" of Clear 3/4" Tubing so you have about 3" per extension. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side.