Light Lens Bulbs and Related Parts

This part is a Hot Tub Light 8' Wiring Harness with a 3 pin Amp Plug and a 12V Bulb with socket. The wire is 8' Long and has a standard socket at one end with a standard 12V bulb found in most hot tubs and an Amp Plug 2 pin at the other end...

This item is a EYC 75W Bulb that is used in Fiber Optic Boxes. It Measures about 1 15/16" across the face and the pins are about 1/4" apart that slip into the bulb socket inside the Fiber Box.. These will work on Supervision or Fiberstars Fiber Optic...

This it is a 115V to 12V Transformer. This Transformer can be used to power a 12V light bulb or bulbs using a 115V Power Source or to replace a bad Light Transformer in a Light Control box that uses 115V power source and usually air style swutches and an...

This item is a Rising Dragon Brand LED Single Light Lens... Features a 1" Face Width and the holse size is about 1/2"... Come with a Lens, O-Ring and Nut.. With the Rising Dragon Pinnacle Light System, there is no complicated cabling or hub layouts...

We are offering Hot Tub Light 7' Wiring Harness with a 2 connection spade connector style ends and a 12V Bulb with socket that is commonly found on Geck SSPA or MSSPA packs as well as Spa Builders and Hydro-Quip packs... The wire is 7' Long and has...

This part is the Cord Side Male AMP Connector that houses (2) Male Pins.. The Pins are not included.. This connector is used often on light cables.. Terminal Type AMP Terminal Style AMP Plug Housing Male Number of...

This item is a Rising Dragon Brand LED Single Light Lens... With the Rising Dragon Pinnacle Light System, there is no complicated cabling or hub layouts. Installation is as simple as running one perimeter cable around the spa and using a harness clip to...

This part is a box of (10) Light Bulbs.. These bulbs are the standard used in most Hot Tubs with Balboa, Gecko, ACC, Hydroquip, Len Gordon, Hurricane, and many more controls.. If your hot tub has a slip in spade style bulb this is probably the correct...

Wall Fitting, Jumbo3-3/4" hole size, 5" face diameter Manufacturer Waterway Model Waterway Light Assembly Light Assembly Part Type Lens-Assembly Hole Size 3-3/4" Lens Size 5"

This item is 3oz of Clear Silicon Sealer that can be used to seal Jet Bodies, Lights, Drains, Unions and more in Hot Tubs and Pools.

This Part is a Back Light Bulb for a Balboa Topsides only. Backlight Bulb Used In Balboa Water Group Digital Topside Controls Series 701 and 724 You will need a Small Flat Screwdriver to remove and install this bulb. Note: Not all Balboa Topsides have a...