Jet Bodies & Jets Complete

This part is a Black Hydro Air 5" Diverter Jet Face Only for a Nordic Spa.     This Item Features the Jet Face Only.   For the Butterfly Style Valve that goes with this jet click this link: Nordic Spa Hot Tub Diverter Butterfly...

Retaining / Lock nut for the Jacuzzi HTA Whirlpool Jet body. This but is required to install the HTA jet and seal it it to you hot tub shell. The internal thread on this nut measures roughly 4-1/2" The jet body this retaing nut fits can be found here:...

This part is a Jet Body with a Stainless Steel & Black Jet , Rising Dragon, Ozone Cluster, Air 3/8" Barb x Water 3/4" Barb, Ell.. To make a connection from this Barbed Jet body back to either Clear Tubing or 3/4" Flex Pipe use this Kit:  3/4"...

Grommet gasket for the 2" CMP Pro-Loc 200 Series SQR jet bodies. This gasket seals the jet body to the hot tub shell. These gaskets can come in white or gray and are the same. If you need the body that matches this gasket we have that here: Jet Body,...

CMP Pro-Loc 200 Jet Body with a 3/4" Smooth Barbed Water fitting and a 3/8" Smooth Barbed Air Fitting..Fits CMP Pro-Loc 200 2" or 2-1/4" Jets only...   This jet body does not include the gray or white grommet gasket, they are sold separately here:...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing and (1) 3/8" x 3/8" Barbed Coupler..   This kit is used to Connect the 3/4" Barbed fitting on the water...

Waterway jet body for their whirlpool / volcano jet. This jet body is found either in the floor of the spa shooting straight up acting as a Volcano or on the side wall of the spa creating a whirlpool effect. Body has a 1" port for water and a 1/2" port...

This Kit consists of 6" of 1" Inside Diameter Clear Tubing, (1) 4oz BLue Glue (2) Clamps and a 1/2" Coupler.. This Kit is used to convert your 1/2" or 3/4" Jet Body flex pipe connection that is leaking to a more modern outside barb type seal... You...

Wall fitting for the Micro Magna jet bodies made by HydroAir. This body receives a gasket and is then threaded into the jet body creating a watertight seal on your spa shell. This wall fitting requires a 1-3/4" hole size. The gasket for this wall fitting...

This part is a Jet Body for a CMP Typhoon 500 5" face diameter Jet.. Hole Size 3-3/4" with Flat Gasket Typhoon Advanced System Black or Gray Snap-Clip Ring in Jet Body (Except 200 Series) NO O-ring on Jet Internal Shaft (It is possible the o-ring...

CMP Pro-Loc 400 Series jet body. This new jet system by CMP is made to improve on the old snap-in design this body uses internal snaps to hold the jet firmly in place. The body has a 3/4" smooth barbed port for your water line and a 3/8" smooth barb for...

This part is a Complete Jet Body for Rising Dragon Quantum 5" Face THREAD In Style Jets Only.. This Jet Body features a water connection of a 3/4" Barb and an Air Connection of a 3/8" Barb.. This clear jet body takes the place of the threaded white jet...