Jet with Face Width 2" to 2 15/16"

CMP Spa jet Internal Directional jet with 5 scallop trim and smooth finish in black. This older jet series has a 2.5" face diameter and only works in its jet body. These jets are in limited supply! The jet body for this jet can be found here: Jet Body,...

Cal Spa 2" directional "Candy Cane" jet. This twist and lock two tone black and stainless jet insert is made by CMP for Cal spa and is in their Pro-Loc series. Easily identified by a small o-ring towards the back of the white cone or diffuser.  This...

This Kit Consists of (1) 2" Gray Bullet Jet Face Internal, (1) Ozone Jet Body with a 3/4" Barbed Water Connection and a 3/8" Barbed Air Connection, (1) 1/2 oz Tube of Silicone Sealer, (6") of 3/4" Tubing with (1) 3/4" x 3/4" Barbed Coupler and (2)...

This Kit Consists of (1) 2" Gray Bullet Jet Face Internal, (1) Ozone Jet Body with a 3/4" Barbed Water Connection and a 3/8" Barbed Air Connection, (1) 1/2 oz Tube of Silicone Sealer, (6") of 3/4" Tubing with (1) 3/4" x 3/4" Barbed Coupler and (2)...

This part is a Complete Jet Internal, Rising Dragon, Threaded, Quantum, 2" face diameter, Roto, Stainless Steel, Gray.. This jet insert is made to thread into your jet body and is not compatible with the 2-1/2" sizes as they use a different backing. See...

This part is a Complete Jet Internal, Rising Dragon, Threaded, Quantum, 2-1/2" face diameter, Directional, Stainless Steel, Gray. This jet insert is made to thread into your jet body and it is not compatible with the 2" sizes as they use a different...

This part is a Complete Jet Internal, Rising Dragon, Threaded, Quantum, 2-1/2" face diameter, Roto, Stainless Steel, Gray.... This jet insert is made to thread into your jet body and it is not compatible with the 2" sizes as they use a different backing...

This part is a Waterway Jet Body that receives an Ozone Cluster Jet.. It features and Air Connection that is a 3/8" Barb and a Water Connection of a 3/4" Barb in a 90 Ell Shape.. To make a connection from this Barbed Jet body back to either Clear...

This part is a Jet Internal, Waterway, Mini Jet, 2-1/2" face diameter, Whirly, Smooth, White.. This Jet Threads into a Jet body that has a threaded hoe that is about 1 5/8"-1 3/4"..   This Jet screws into a Jet Body Like These:  

This part is a Adjustable 2 1/4" Cluster Storm Threaded Directional Jet Internal Reverse Swirl Metallic Stainless and Black Waterway.. This Jet is the Threaded Version of a Cluster Storm Jet.. If yours is not the new threaded style choose the snap in...

They kit is a Set of 5 Replacement Diffusers for a 2.95" to 3.25" Pentair Cyclone Micro Jet made by Pentair. Note: Jets are NOT Included only Diffuser!! I also have the replacement jet in another auction if you have all of the parts...

This kit is a (3) Piece O-Ring Set for the Old or New Style Adjustable Mini Jet Nozzle Inserts made by Waterway.  This kit fits either nozzle hole size. The below picture shows the location of the (1) Large O-ring and The (2) Small o-rings....