Sundance Hot Tub Parts

This part is a Jacuzzi or Sundance Spa 4 1/4" Light Assembly Kit , Lens, Gasket and Nut..  The face size is 4 1/4" Some websites say 4 1/2" but ti is not. The hole size is 3 1/8". This fits only Jacuzzi and Sundance Hot Tubs that fit these...

This 1.5 Horse Power 48 Frame Pump Wet End fits LX Jacuzzi or Sundance Brand 6500-090 , 6500-345 , 6500-357 , 6500-845 Pump Motors only that would be about 9.0 Amps at 230V or 14.0 Amps at 115v... These pumps usually have the part number WUA-150,...

This part is a 1.5 Horse Power 115V 13.8/3.8 Amp (2) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have the part number 48WUA1501C-II and or 6500-090 , 6500-345 , 6500-357 ,...

This Wet End with Barb is a 2.5 Horse Power that fits Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this Wet End fits will have the part number 6500-352, 6500-365, 6500-367 or 6500-363 on the label along with WUA400-I or WAU400-II...

This Wet End is a 2.5 Horse Power that fits Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this Wet End fits will have the part number 6500-352, 6500-365, 6500-367 or 6500-363 on the label along with WUA400-I or WAU400-II. Note: You...

This part is a 230V Laing Circ pump That fits some Jacuaai Premium and Sundance tubs. This pump has 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diamater is compact and lightweight, less...

This part is a Circuit Board, Sundance/Jacuzzi, LX-10, Rev 3.56+, (1999 +), w/3 Big Relays, 1-Pump, w/Circ Pump.   It will replace several different boards including but not limited...

This part is a Sundance Spa Filter Cartridge with a 65sqft with a Castle Closed top, 2-1/16" Hole on bottom. It is 7-1/2" Wide x 14-3/4" Tall.. Diameter 7-1/2"  Length 14-3/4"  Bottom Style Open  Top Style Castle  Bottom...

This part is a Sundance or Jacuzzi, Hold Down: Filter Hook Assembly This part locks on the closed crown side of the filter to hold it in place while the open end is open locked into place by a thread nut..  For the filters and parts that...

This part is a Sundance Jacuzzi, Filter Suction Adapter Fitting, 2" MPT, Filter Pipe w/ Jam Nut.. This part threads into the wall of the hot tub and you slip the open hole end of the filter over this part then lock the crown side of the filter into...

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...