Sundance Hot Tub Parts

This 1.5 Horse Power 48 Frame Pump Wet End fits LX Jacuzzi or Sundance Brand 6500-090 , 6500-345 , 6500-357 , 6500-845 Pump Motors only that would be about 9.0 Amps at 230V or 14.0 Amps at 115v... These pumps usually have the part number WUA-150,...

This Wet End with Barb is a 2.5 Horse Power that fits Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this Wet End fits will have the part number 6500-352, 6500-365, 6500-367 or 6500-363 on the label along with WUA400-I or WAU400-II...

This Wet End is a 2.5 Horse Power that fits Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this Wet End fits will have the part number 6500-352, 6500-365, 6500-367 or 6500-363 on the label along with WUA400-I or WAU400-II. Note: You...

This part is a Sundance Spa Filter Cartridge with a 65sqft with a Castle Closed top, 2-1/16" Hole on bottom. It is 7-1/2" Wide x 14-3/4" Tall.. Diameter 7-1/2"  Length 14-3/4"  Bottom Style Open  Top Style Castle  Bottom...

This part is a Sundance or Jacuzzi, Hold Down: Filter Hook Assembly This part locks on the closed crown side of the filter to hold it in place while the open end is open locked into place by a thread nut..  For the filters and parts that...

This part is a Sundance Jacuzzi, Filter Suction Adapter Fitting, 2" MPT, Filter Pipe w/ Jam Nut.. This part threads into the wall of the hot tub and you slip the open hole end of the filter over this part then lock the crown side of the filter into...

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...

This Kit is an O-Ring that is a square style for a Piranha pump and (2) 2 5/8" C to C for the pump unions found on Jacuzzi, Sundance, Hotspring and other brands as well...Part Type    Square RingO Reference Number  ...

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

This Seal Kit for 6500-907 LX CIRCULATION PUMP 230V 2006+ JACUZZI® J-400 PREMIUM SUNDANCE® Pumps Only. It is 1 39/64" Across the back of the Spring Seal part that goes into the volute or wetend back and the Ceramic & Rubber part that...

This Part is a 48 or 56 Frame Face Plate for a Jacuzzi or Sundance Intertek LX Brand Pump Wet End only this face plate uses fine thread bleeder plugs be sure to compare your old plugs to the pictures. This face has a flange inside...