Sundance Hot Tub Parts

This Wet End with Barb is a 2.5 Horse Power that fits Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this Wet End fits will have the part number 6500-352, 6500-365, 6500-367 or 6500-363 on the label along with WUA400-I or WAU400-II...

This Wet End is a 2.5 Horse Power that fits Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this Wet End fits will have the part number 6500-352, 6500-365, 6500-367 or 6500-363 on the label along with WUA400-I or WAU400-II. Note: You...

This part is a 230V Laing Circ pump That fits some Jacuaai Premium and Sundance tubs. This pump has 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diamater is compact and lightweight, less...

This part is a Circuit Board, Sundance/Jacuzzi, LX-10, Rev 3.56+, (1999 +), w/3 Big Relays, 1-Pump, w/Circ Pump.   It will replace several different boards including but not limited...

This part is a Sundance Spa Filter Cartridge with a 65sqft with a Castle Closed top, 2-1/16" Hole on bottom. It is 7-1/2" Wide x 14-3/4" Tall.. Diameter 7-1/2"  Length 14-3/4"  Bottom Style Open  Top Style Castle  Bottom...

This part is a Sundance or Jacuzzi, Hold Down: Filter Hook Assembly This part locks on the closed crown side of the filter to hold it in place while the open end is open locked into place by a thread nut..  For the filters and parts that...

This part is a Sundance Jacuzzi, Filter Suction Adapter Fitting, 2" MPT, Filter Pipe w/ Jam Nut.. This part threads into the wall of the hot tub and you slip the open hole end of the filter over this part then lock the crown side of the filter into...

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...

This Kit is an O-Ring that is a square style for a Piranha pump and (2) 2 5/8" C to C for the pump unions found on Jacuzzi, Sundance, Hotspring and other brands as well...Part Type    Square RingO Reference Number  ...

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

Note: When you order this pump you will receive the newest version of the pump which is a baseless 2.5 HP pump and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not...