Master Spa and Down East Hot Tub Parts

This Kit is a Silicone Kit & Lo-Profile Drain Assembly, 3/4" slip or 1" Street, Gray, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one...

This part is a replacement filter for Dual Filter applications in 2002+ Master Spas and Down East Spas. This filter is found on the inside of a larger filter and uses the stalk system with a center stalk and a threaded cap. You can find these different...

This pillow is a Master Spa Pillow, Oval, Warped Triangle, Charcoal.. Dimensions: Length 9.0 inchesWidth: 5.625 inchesHeight: 1.25 inchesWeight: 2.6 oz. Distance between Pins: 5.25 inches  

This Item is an Eco Pur Filter for the Teleweir System on Master Spa Build tubs.. It is 5" Wide X 3 1/2" Tall on the cartridge and has a 1 1/2" SAE Threaded fitting that measure about 1 7/8" Edge to edge on the threads.. This filters works with some but...

This part is a Halo Style Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 3/4" Barb x 3/4" Barb Single Port.. To connect the valve to 3/4" plumbing simply glue...

This part is a 3 1/2" Master Spa, Down East or Freedom Spa Jet. This Jet is 3 1/2" across the Face Single. It features a Dual Hole Spinning black nozzle.  ASPX241119

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...

This part is a Diverter Kit with a Stem, Silver "S" Style 4 5/16" Long Diverter Handle, Graphite 3 11/16" Graphite Cap & O-ring Kit. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is...

This part is a Reinforced "S" Style 4 5/16" Gray Spa Diverter Handle Knob only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the diverter cap. The...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap & O-ring Kit only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the...