Dimension One Hot Tub Parts

This part is a Set of 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes (2) split nuts , (4) Screws,(2) 2" Slip X 2" Threaded Unions and (2) gaskets for use with a 2" Heater Union. The Heater Flange Split Nut mounts to the...

You are buying a 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes the split nut , (2) Screws, 2" Slip X 2" Threaded Union and a gasket for use with a 2" Heater Union. The Heater Flange Split Nut mounts to the heater tube...

This filter Fits some Dimension One and At Home Hot Tubs after 2000.. It is 10 1/2" Ta x 7 1/8" Wide has a closed top with castle tabs and features a butterfly type twist lock bottom where you slide it down over the butterfly hole in the filter housing...

This 115V Laing E-10 pump with a 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diameter  is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and designed...

This 230V Laing E-10 pump with a 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diamater  is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and designed...

Grundfos Circulating Pump 230V with 1" Barbs... In my opinion this is a better pump than the Laing Brand... Spa Guy Note: If you are using this pump to convert from a Laing you will need this Conversion Kit If you want the same kit but need Glue Click...

Note: The Original D-Tec Pressure Switch is no longer available so when you place your order you will receive the updated version D-Tec 2 on the left.. This part is a D-Tec 2 (1) Amp 2PSI Pressure Switch that features 1/8th" MPT Standard...

This part is a 5.5KW Titanium (Best) Heater Element.  This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, Spa Guts, Spa Builders Len Gordon, Brett...

This part is a Standard 4.0KW Heater element that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, and most other standard Hot Tub Heater Tubes.   This part used in newer...

This part is a 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union receives a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the other...

This part is a Standard 5.5KW Incoloy Heater Element for 230V or 115V Applications that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, and most other standard Hot Tub Heater Tubes...

This part is a Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2" center to...