Cal Spa Hot Tub Parts

You are buying a Waterway Brand Flapper Tee Air Check Valve with a  1" Slip X 1" Slip Fittings on each end.

These are now obsolete now click this link for the solution.. You will not need all of these parts but we can't get it without them: Lo-Pro Floor Drain, 3/4" Slip Barb Ell, Dark-Silver-Glitter,...

You are buying a Set of (2) 2" Heate

You are buying a 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes the split nut , (2) Screws, 2" Slip X 2" Threaded Union and a ga

This part is a Set of

You are buying a 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes the split nut , (2) Screws, 2" Slip X 2" Threaded Union and a ga

This Filter is 14-7/8" tall x 5" wide it has 2 1/8" holes on the top and bottom. This filter does fit some Cal Spas but looks very similar to a standard sized filter which is 13 5/16" tall but this...

This part is a 3.0HP Power-Right Pump Impeller that would be found on a motor with about 12.0 Amps at 230V.. Closed face impeller made for the Power-Right 3.0ohp/6.0thp spa pump. Ra

This part is a Vacuum Switch like you will find on some  Cal Spas in the suction side of the pump. Specs V4001P-DX Replacement, 21A, 1/8"mpt. For a switch like the original click this link:

This Part is a Surface Mount Style HI LIMIT: Single Pole Single Throw THERMAL FUSE Auto Reset (With NO CAPILLARY)This Hi Limit Surface mount surface mounts to the heater in a spot where it can read...

This Filter Cartridge fits Some New Cal Spa and Marquis Spas. It is 12 1/2" Tall x 5 3/16" Wide with 2" Mpt Threads which is a think thread that measures about 2 3/8" outside diameter. The MPT...

Len Gordon has discontinued this switch. We now send this pressure switch in its place: Pressure Switch, 25A, Tecmark, 1/8"mpt, SPDT, Plastic This part