Complete Heaters

This part is a Hydro Quip Versi-Heat remote heater replacement assembly. The metal tube measures 2" x 13" with a 5.5 kilowatt, 230v heater element inside. Some versions are 4.5kw but this one will...

This heater is a flow through type heater. The heater is powered and controlled by the control box. Stainless steel tube with pressure taps. Additional Information

This part is a 5.5kw 15" long Heater Flo Thru Tube found in Waterway Neo Series control packs.. You can replace just the element and not the tube and save some money the kit can be found here:

This is a Universal Low Flow Spa replacement heater that can be used in place of any Low Flow with the included kit or in some cases a little bit of additional tubing and fittings will be needed to...

This is a Universal Low Flow Spa replacement heater that can be used in place of any Low Flow with the included kit or in some cases a little bit of additional tubing and fittings:

Caldera/Watkins replacement 4.0kw 230v Low Flow Trombone Heater. 26" x 6" dual element w/24" pigtail cord & off angle box w 3/4" barbs & pressure switch cable. This heater is used with a low flow...

Leisure Bay Stainless steel, 17-1/2" x 3" 4.0kW/230v replacement heat exchanger. Made for use exclusively on Leisure Bay hot tubs. The original heater may have used a redundant hi-limit, if that is...

This part is a Complete Trombone Heater that is about 23" X 10" X 15" Squareback 3-Wire with Built in Thermal Cut-Out. Includes Titanium Heater Element and Hi-Limit Disk. This heater fits a lot of...