Complete Heaters

You are buying a 4.0KW Heater Complete Assembly includes Tube, Element, Metal Case and connecting wires. This unit features a high limit holding tab and a port for the pressure switchThis Heater Fits Cal Spa Hot Tubs and Is a Perfect replacement for...

Cal Spas 1990-1994 New replacement 5.5 KW electric heater assembly for older Cal Spa control systems, such as the PS1-PS5 systems. The original heater had a 2 inch manifold that tapers down to 1.5 inch unions at each end. The new version has a heater...

Aftermarket Replacement for Cal Spa XL Exchanger This heater assembly is not an exchanger but an in-line flow thru replacement. This heater assembly is designed as a drop-in replacement. 2" x 15"s/s housing with 2" slip tailpieces

Flow Thru Heater Assembly used in Sundance Spas, and Spa Builders, and Pinnacle Spa Controls Stainless steel 2-1/4" x 15" with 5.5kW/240v, 1/8"npt pressure switch tap, (2) 2" socket tail piece, (2) 10-32 x 3/8" mounting stud

This original Vita Spa Heater is obsolete and has been replaced by the new model which will come with dettached heater pigtail wires. Vita/DM Spas Stainless steel 4.5kW/230v, 2" x 17-5/8" flow thru replacement heater assembly with a pressure switch tap...

Brett Aqualine EM100, EM190Also used in Hydro-Quip pre-1997 packs. 15" heater manifold assembly includes 5.5kW/240v element. Stainless steel manifold has top indent grooves and a 1/8"npt pressure switch tap. Shipped with 2" tailpiecesAlso used in ACURA /...

This part is a Heater, FloThru, Universal Fit, 15" x 2", 230v, 4.0kW..  This heater will work in place of the following heaters: 1563-08 , 20-00245 , 20-00317 , 20-00318 , 20-00319 , 20-00324 , 20-00433 , 20-00434 , 20-00454 , 26-0034 , 26-0036-R1C...

Stainless steel aftermarket replacement heater assembly that fits systems that use dual sensor technology. 2" x 15" with two thd taps for the sensor assembly rated at 5.5kW/240v. Replacement sensors sold separately.

Balboa Water GroupStainless steel replacement heater assembly, 4.0kW, 230v or 115v, the inside Diamater of the tube is 2" and the overall length of the tube is 15" not including the split nuts on each end. This comeplete heater includes M7 sensors,...

This part is a Stainless steel aftermarket replacement heater assembly that fits systems using a pressure switch positioned 90 degrees from the heater terminals. 5.5kW/230v with 1/8"npt pressure switch tap. 2" x 15" manifold includes 2"mbt nuts and 2"s...