Heaters and Related Parts

This part is a Hydro Quip Versi-Heat remote heater replacement assembly. The metal tube measures 2" x 13" with a 5.5 kilowatt, 230v heater element inside. Some versions are 4.5kw but this one will work in place of that version without issue. The black...

This heater is a flow through type heater. The heater is powered and controlled by the control box. Stainless steel tube with pressure taps. Additional Information Heater Type - Flow-Thru Heater Style - Flow-Thru Wattage - 4.0kW, Voltage -...

This part is a 5.5kw 15" long Heater Flo Thru Tube found in Waterway Neo Series control packs.. You can replace just the element and not the tube and save some money the kit can be found here: (D) Heater Element 5.5kw Gasket Kit Hot Tub Spa Part M7...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, P-Switch and Assorted Plumbing Fittings.. Heater Type - Square Flange Wattage - 5.5kW, Voltage - 230V Heater Dimensions - 1-1/2"...

This is a Universal Low Flow Spa replacement heater that can be used in place of any Low Flow with the included kit or in some cases a little bit of additional tubing and fittings will be needed to complete the retrofit: Vertical Low Flow Canister...

This is a Universal Low Flow Spa replacement heater that can be used in place of any Low Flow with the included kit or in some cases a little bit of additional tubing and fittings: Vertical Low Flow Canister Universal Replacement Heater by...

Caldera/Watkins replacement 4.0kw 230v Low Flow Trombone Heater. 26" x 6" dual element w/24" pigtail cord & off angle box w 3/4" barb & pressure switch cord. Used on Caldera Utopia and Paradise Series 2002+. Replaces Laing #6595.1,...

Raypak Replacement Element3 x 3 flange, 4 mounting holes, flying wire leads, welded construction

Leisure Bay Stainless steel, 17-1/2" x 3" 4.0kW/230v replacement heat exchanger. Made for use exclusively on Leisure Bay hot tubs. The original heater may have used a redundant hi-limit, if that is the case when replacing with this heater simply protect...

This part is a Complete Trombone Heater that is about 23" X 10" X 15" Squareback 3-Wire with Built in Thermal Cut-Out. Includes Titanium Heater Element and Hi-Limit Disk. This heater fits a lot of different brands of tubs and there is a list below of...