Heaters and Related Parts

This Part is a 5.5KW Titanium Heater Element with (2) Heater Union Gaskets and a 1/2Oz Tube of Special Hot Tub Formulated Silicon Sealer to Seal the Threads. This Heater Element features the bend in the back of the element needed to fit the Balboa...

This part is a 4.0KW Titanium Heater Element with (2) Gaskets and a 1/2Oz Tube of Special Hot Tub Formulated Silicon Sealer to Seal the Threads. This Heater Element features the bend in the back of the element needed to fit the Balboa M-7...

You are buying a Gasket & O-Ring that fits a 5"x 5" Flange Heater. NOTE: This listing does not include the heater!! These Parts are found in Plastic Heater housings in Brett Aqualine, Premier Allstate, and Hot Water Products. I...

This part is a Set of (10) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (8) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (6) Standard 2" Heater or Pump Union Gasket with 2 1/2" Center to Center Lip... The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (4) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (3) Standard 2" Heater or Pump Union Gasket with a 2 1/2" center to Center Lip.. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This Part is a Set of (2) Standard 2" Heater or Pump Union Gasket with a lip that is 2 1/2" Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is...

This part is a 2 1/2" Thread X 2" Slip Heater Union with Gasket that matches Union. The Union receives a 2" pipe or fitting on the glue side and then Screws to a 2 1/2'" Heater Flange using a 2 1/2" Nut on the heater side...

This part has been discontinued by it's manufacturer.. You are buying a 2 1/2" Thread X 1 1/2" Slip Heater Union with Gasket that matches Union. The Union receives a 1 1/2" pipe or fitting on the glue side and then Screws to a 2...

You are buying a 1 1/2" Threaded X 1" Slip Heater Union with Gasket or O-Ring that matches Union. The Union recieves a 1" pipe or fitting on one side that measures 1 1/4" Outside Diameter and then Screws to a 1 1/2"...