Heaters and Related Parts

Balboa 5.5 KW Titanium heater assembly with stud. Can be run at 230 volts for the full 5.5 KW or at 115 volts for 1.5 KW. This Flo Thru heater has 2" unions that measure 3" on the inside and is 15" in length, measured from flange to flange. Now comes...

This part is a Heater for a Bath or Garden Tub.. H-Q InLine, 115v, 1.0kW, 3ft, Replaces Versi-Heat with Pure Heat... This heater can be used with 1 1/2" pipe which would measure about 1 7/8" OD.. You could use it wil 1" pipe with a reducer bushing....

Popular 3.0 KW flow thru 15" heater with stud made by Balboa for European and 50 Hz systems that utilize the M7 heater design. Can be found in the Balboa VS, GS and BP systems. The assembly includes two new M7 sensors, tailpieces, union gaskets and a...

Balboa 4.0 KW (4000 watt) 15" flo-thru heater with 2" unions. This popular heater is found on older legacy models of Balboa spa packs and controls such as the light leader and early M2 and M3 systems (pre M7). Includes the pressure switch with guard...

Replacement 5.5 KW flo thru heater assembly for early 2000's Cal Spa models. Has a flange to flange length of 16.25" and includes 2" unions. The element has the standard 1-1/4" electrical terminal spacing. Also known as the HEA14100070 CalHeat heater...

This part is a Heater Assembly, Gecko, Heat.Wav, IN.YJ, 1.0/4.0kW, 120/240v, 2" x 15", w/Temp and Flow Sensors, w/4' Terminated Cable Heater Type Flow Thru Heater Wattage 4.0/5.5kW  Inlet Size 2"  Outlet Size 2"  Type...

This is a Heater for a Balboa flo-thru found on Lite Leader Packs.. 54115, 54114. It features a Stainless steel housing with pressure switch. Additional Information Heater Type - Flow-Thru Heater Style -...

You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tube, Element, Split nuts, pigtail wires and Gaskets. The new version of this heater includes dettached pigtail...

This part is a Heater Assembly for a HydroQuip CS800 Control Pack.. 4.5kW, 230V, 2" x 15" Long..  CS800 heater, 4.5kW, 2.25”x15”, 304SS, PSI tap, cover plate and studs. Includes 2” ridged gaskets.   Heater Style -...

This part is a complete Heater, Flo Thru, Balboa M7, 800, 825, 15" x 2", 230v or 115v , 4.0kW, with Sensors..  This heater tube has a stud on the top and bottom make sure yours has them too.. This heater DOES include m7 sensors and split nuts,...

This part is a flow-thru style is used on the 2006-forward Solana TX (triangle spa), RX (round) & SX (square) as well as the 2006-forward Hot Spot models except the Sprint and Dash. 15” length 4.0kWgrounding and mounting studsTemp Sensor or...

This part is a Heater for a Bath or Garden Tub.. H-Q InLine, 115v, 1.5kW, 3ft, Replaces Versi-Heat with Pure Heat... This heater can be used with 2" which would measure about 2 3/8" OD or 1 1/2" which would measure about 1 7/8" OD pipe....