Gate Valves

This Kit is a 2" Sweep Pump Union To Plumbing Connect Kit found in many Hot Tubs.   The 2" Sweep Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" Street X Slip 90° fitting on...

This part is a Slice, Gate Valve, Waterway, 2-1/2" Slip x 2-1/2" Spigot, Coast Spas and Others... The OD of the Street Spigot side measures about 2 7/8" and the ID of the Slip side measures about 2 7/8"..   This is a very unusual valve and an odd...

This Kit is a Set of (2) Jacuzzi J Pump Style Pump Unions with 1 1/2" Slice Valves. The 1 1/2" Slice valve will glue inside the J pump union then you glue your 1 1/2" pipe which measures about 1 7/8" OD into the slice valve. The J Pump Union receives...

Thius kit is a set of (2) 2" Spigot X 2" Slip Slice Gate Valves and (2) 2" Heater Unions with Gasket or Oring that matches Unions. The Valve recieves a 2" pipe or fitting on one side and then slips inside of a 2" fitting...

This Kit is a Set of (2) 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi® J Style Pump Unions with O-rings, (2) 2" Street x Slip Slice Gate Valve and (2) 2" Couplers for glueing 2" plumbing to the slice valve...

You are buying a Set of (2) 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes (2) Split Nuts , (4) Screws, (2) 2" Slip X 2" Threaded Unions and gaskets for use with a 2" Heater Union as well as (2) 2" Slip x 2" Street...