Flow Thru Element, 3.0kW, Incoloy, 10", 115v or 230v
- SKU:
- HTP47-555-LE77
- Shipping:
- Calculated at Checkout
Description
This part is a Standard 3.0KW Heater Element 115v or 230V that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes.
This also fits Gecko, ACC, and most other standard Hot Tub Heater Tubes.
This part used in newer hot tubs and features.
Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 14.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc…..
Related Products
Center Mount, Flow Thru Element, 4.0kW, 115v or 230v, 10", Middle Terminal
MSRP:
$79.99
$59.99
This part is a Center Mount 4.0KW Incoloy Heater Element for 230V or 115V Applications.
Center Mount, Flow Thru Element, 5.5kW, 115v or 230v, 10", Middle Terminal
MSRP:
$79.99
$59.99
This part is a Center Mount 5.5KW Incoloy Heater Element for 230V or 115V Applications.
Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
MSRP:
$69.50
$44.99
This part is a Standard 4.0KW Heater element that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes.
Heater Element 5.5kw Hot Tub Spa Part M-7 Universal 230V or 115V Incoloy (Good)
MSRP:
$69.50
$44.99
This part is a Standard 5.5KW Incoloy Heater Element for 230V or 115V Applications that features the bend in the back of the element need
Heater Element, 5.5kW, 10-3/4" ,115v/230v, M7, Titanium (Best)
MSRP:
$129.99
$79.99
This part is a 5.5KW Titanium (Best) Heater Element. This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes.
This also fits Gecko,...
IN.YJ Gecko Heat.Wav 1.0/4.0 115/230V Flow Thru Heater
MSRP:
$379.99
$279.99
This part is a Heater Assembly, Gecko, Heat.Wav, IN.YJ, 1.0/4.0kW, 120/240v, 2" x 15", w/Temp and Flow Sensors, w/4' Terminated Cable
Heater Type Flow Thru Heater
Wattage 4.0/5.5kW
Heater, Flo Thru, Balboa, M7, 15" x 2", 230v or 115v, 5.5kW, with Sensors
MSRP:
$379.43
$224.99
Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW, 230v or 115V.Thie heater measures 2" Inside Diameter of the tube and the length of the tube is 15". Includes M7 sensors,...
Heater, Flo Thru, Balboa M7, 15" x 2", 230v or 115v , 4.0kW, with Sensors
MSRP:
$322.69
$189.99
Balboa Water GroupStainless steel replacement heater assembly, 4.0kW, 230v or 115v, the inside Diamater of the tube is 2" and the overall length of the tube is 15" not including the split nuts on...
