Control Boards and Systems

Catalina Cat 200 M-2/ M-3 Replacement Board This circuit board replaces M-2 and M-3 Serial Deluxe and Serial Standard product. This board includes features like 30 day battery backup and optional ORP protection. System type (deluxe or standard) and other...

This part is a Duplex Digital and Super Digital/M-1 Board.. This board requires a 120v power supply and can work with any Duplex Digital. Balboa circuit boards are marked with a ÒChip NumberÓ that is located on a white label placed on the...

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 3 Button Mini Oval Topside, a Light wire...

No longer available. Please see Balboas new retro-for replacement system here: Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP500 Topside This is a Balboa Retrofit Complete control system with a 15" long...

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater Jumper Strap to connect the heater to the circuit board on Balboa EL, GL, and Value systems. 2 required.   Heater Part...

This part is a Balboa SUV Board.. There are many part numbers you will find on your old board to cross to this board..One thing that goes wrong with this particular board is the transformer tabs or fingers will break in two causing the board not to power...

You are purchasing a New Balboa 52295 Non M7 Spa Hot Tub Board. Watch the video for more information including some diagnostic tips.. This board does use a pressure switch.   Board is used with an E7 Topside and can run up to two pumps and...

This part is an Enclosed Circuit Board Relay for 15v DC boards like you would find on Jacuzzi, Sundance or others.. Coil contacts are on bottom of relay at PC board. Trace saver tabs are available at top of relay Coil Voltage...

Note: This board is Obsolete but you can use this board: Replacement for this Board.. This Balboa Board is a VS-500 meaning it is a one jet pump board that will run a 12V light and a Circulation Pump also if equipped... This board can be found under all...

The VS300 circuit boards have been discontinued. We now send the VS501Z circuit board which has a few more receptacles but is the same otherwise in fit and programming. This part is a VS300 Board that operates (1) Pump and Light..If your board has this...

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa LE and Value Systems. You can use this...