Control Boards and Systems

This part is a Balboa Circuit board replacement for a Master Spa 54418 EL8000 Mach 3 system it is a new board and can be found under several different numbers..If you have a TV in your model do not order this board as the replacement doesn't have support...

This part is a Balboa Circuit board for an EL2000 Mach 3 system. It is a new board and can be found under several different numbers.. The compatible topside would be a MOLEX system plug not a phone plug..THIS BOARD INSTALLS IN A PLASTIC BOX and Will not...

This part is a Single of Jumper Wire that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board...

This part is a Set of Jumper Wires that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board...

As of 2024 Balboa has switched the VS501SZ board to the VS510SZ model which is what we send. Also new circuit boards will come with the plug and click female heater adapter installed. It can be removed and you reuse your old wiring or install the male...

This part is a New Style 3-Lug Terminal Block found on many Balboa brand spa and hot tub boards. The original factory blocks were a cream/white color, but the new ones we now have in stock are green. They interchange perfectly and work exactly the same...

In limited supply, get one while you can!! This part is a Balboa Circuit board for an EL2000 Mach 2 system it is a new board and can be found under several different numbers.. The compatible topside would be a MOLEX system plug not a phone plug.. This...

This Item is a Board Fuse .05Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/8" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass but used ceramic to dissipate heat. You...

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components.. 6 position terminal block 5-3/16" overall length.

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater   This part is a single Jumper Strap to connect the heater to the circuit board on Balboa B2DG and B240 Systems. Requires two per...

This circuit board is obsolete. We have a compatible retro-fit option available here: Control Retrofit Kit Balboa BP7, 2 Pump, Pump 3/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP600 Topside This board is a replacement board for Circuit Board, Jumpking...

This part is for a Set of (2) Standard Balboa Board Replacement Repair Relay made by Zettler. This Relay is the standard relay found on most Balboa Boards but it has double tabs on it so you can add jumpers from the tabs to the feed and load side of the...