Electronic Control Systems and Parts

You are purchasing a 3 Terminal Power Block found on many Control pack and board set ups..

This puts is a removal kit for a Leviton Blank Face Style GFCI that is mounted on the front of some old style air button packs... As the Original GFCI is no longer available..  The Front Mounted GFCI part is no longer available the solution is...

This part is a 96" Hi Limit Sensor with the box style connectors.. This sensor is used with Some Jacuzzi Premium Hot Tubs and the following Sundance systems: 1992 Suncoast, 1996-98 Suntub, 1997-2005 400, 600, 600-S, 750, 800, 1997 850, and 2005+ 880...

This part is a 22" Hi Limit Sensor with the box style connectors.. This sensor is used with Some Jacuzzi Premium Hot Tubs and the following Sundance systems: 1992 Suncoast, 1996-98 Suntub, 1997-2005 400, 600, 600-S, 750, 800, 1997 850, and 2005+ 880...

This part is a Set of Jumper Wires that would go from a standard heater element Electrode Tab to the board bolts.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board Application    Balboa Water GroupManufacturers Part...

You are buying a Cal Spa 7000 or 9000 Heater M7 foam type Sensor. This Sensor comes with the wire, Connector, and The foam sensor. It DOES NOT include the tube, the tube side mount or the pull ties. When this sensor is bad it will generally cause a SN...

This part is a Sundance or Jacuzzi Hi Limit with the smaller bulb for 400, 600, 600-S, 750, 95+ with Bypass Heater... LED Hi Limit Sensor for Jacuzzi Hot Tub models J-235, J-245, J-275, and J-280. Fits all Jacuzzi J-200 Series Hot Tubs from 2011 to...

You are buying a Pressure Switch RP2100 with Plastic Header that fits a Raypak Gas Heater System, 105B, 185, 130A, 207A, R185A, 1.75psi..  PRESSURE SWITCH IS A BARKSDALE (THE LITTLE GENERAL) SWITCH # MSPS-EE05-Q71 .5-5.0 PSI (8 MAX) MAX...

This part is a Direct replacement sensor kit for Watkins No-Fault 4000 or 6000 heater.Includes: Temperature Sensor, Hi-Limit Sensor, and (2) Two rubber O-Rings with newer Style Connectors 2002+.  Sensor Application Spa Control Sensor...

This part is a PC Board Plastic Standoff Holder Kit 1/4" long, Reverse Lock Style, Pack of 12, Fits Balboa and some other Brands...  We also have the 3/4" Version Here: Click for 3/4" Standoff Kit 

This part is a PC Board Plastic Standoff Holder Kit 3/4" long, Reverse Lock Style, Pack of 12, Fits Balboa and some other Brands...  We also offer the 1/4" version of this part: For the 1/4" Standoff Kit Click Here

This Part is the O-ring used to seal the Temperature Sensor On Sundance and Jacuzzi Brand Hot Tubs Only.. Note: Temperature Sensor is sold separately..  The sensor this O-Ring Fits are used with Some Jacuzzi Premium Hot Tubs and the following...