Digital Control Systems and Parts

Vita Spa Circuit BoardThe following topside(s) are compatible with the above circuit board: 58-103-100602-18-11 There is now a revision to this board. A resettable fuse has been added to protect the board from being damaged when hooked up to a defective...

This system is no longer made the replacement would be this one: Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP500 Topside This is a Balboa Retrofit Complete control system that will run (2) Jet Pumps...

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 3 Button Mini Oval Topside, a Light wire...

This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (2) Jet Pumps  or (1) Jet Pump and a Blower, (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and...

This part is a Balboa SUV Board.. There are many part numbers you will find on your old board to cross to this board..One thing that goes wrong with this particular board is the transformer tabs or fingers will break in two causing the board not to power...

Balboa circuit boards are marked with a ÒChip NumberÓ that is located on a white label placed on the logic chip near the center of the board. It is imperative that this number is supplied to Horizon Spa & Pool Parts for proper circuit board match. Just...

You are purchasing a New Balboa 52295 Non M7 Spa Hot Tub Board. Watch the video for more information including some diagnostic tips.. This board does use a pressure switch.   Board is used with an E7 Topside and can run up to two pumps and...

This pack is no longer available but we have a solution click here for the replacement pack that will take the place of this system: BP7 Ths is a Direct Retrofit controller for a Gecko SSPA System this pack will run (1) 2 Speed pump, an Ozonator and a...

This part includes the replacement box only. You Choose these packs based off of the original part number found on your pack label this part number is any of these: 3-72-7018 , 844259, 0602-221001 , 0602-221015, 0602-221022 or scroll down for more...

This kit is no longer available you would choose this kit: Retrofit MODPACK 202 Control Pack, (2) Pump, Blower, Circ Pump, Ozone and 5.5kW, 230v This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (3) Jet...

The Lite Leaderª replacement is now available! This unit will replace a Balboa Light Leader system in almost any configuration. It can even be used to replace a system with a remote heater or use the heater in it's factory spot. It is designed to...

Ths is a Direct Replacement controller for a Gecko SSPA System this pack will run (1) 2 Speed pump, an Ozonator and a light only. Please be sure that you make sure your topside is compatible. It is only compatible with TSC-9, TSC-18 or TSC-19...