Digital Control Systems and Parts

This part is a Daughter Board 1 (DB-1) Kit for Waterway NEO 2100 Spa Control System. Used to add an extra 2-Speed pump to the system.Kit Includes: (3) 1/4" Hex #6-32 x 1.5" Standoffs, (3) Screws and (1) Zip Tie. NOTE: WE DO NOT ACCEPT RETURNS ON...

This part is an optional add on to any ModPack to make the system operate a fiber optic system.. You need to let us know if your fiber box is 115v or 230v when you purchase this.. Note: This is to be purchased when you purchase a ModPack that can be...

  This part is a 3 Terminal Power Block found on some Jacuzzi or Sundance Control pack and board set ups..   Jacuzzi® Spa Terminal Block, Two Position Strip (TB1, All Models Except The J-380/J-385, J310/J-315 And J-230). Also...

This part is a 2 wire Pressure Switch Harness that fits some Balboa Boards.. Value, 2000, LE, SUV and more.. Circuit Board Application Balboa Water Group Circuit Board Type New Manufacturers Part Number LBLLC Circuit Board...

This part is a Used New Style 3 Lug Terminal Block found on many Balboa Brand Spa Hot Tub Boards. This terminal Block can get burned on one or two legs and if the soldered on finger terminals are good on the board you can replace this part and not buy a...

In this video The Spa Guy tells you the basics about diagnosing and replacing a M7 sensor on a Balboa Board.  Click this link for the m7 sensors on this site: M7 Sensor #sparepair #hottubrepair #spaguy...

This Item is a Board Fuse .05Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/8" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass but used ceramic to dissipate heat. You...

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components.. 6 position terminal block 5-3/16" overall length.

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater   This part is a single Jumper Strap to connect the heater to the circuit board on Balboa B2DG and B240 Systems. Requires two per...

This part is a Control Box Cover that fits Balboa VS or GS Series Control boxes only..

This part is for a Set of (2) Standard Balboa Board Replacement Repair Relay made by Zettler. This Relay is the standard relay found on most Balboa Boards but it has double tabs on it so you can add jumpers from the tabs to the feed and load side of the...

This part is a Blackout, Adapter, Plate for an Analog Topside Control, Air, Tecmark, sometimes called a Command Center.. This Tecmark / TDI Command Center conversion kit can be used to mate the new style Command Center to the older smaller size or to...