Complete Pump, Aqua-Flo, XP2, 1.5HP, 230v, 48 frame, 2"x 2", 1 or 2 Speed 7.7A

(No reviews yet) Write a Review
SKU:
HTP34-402-KLEL
Shipping:
Calculated at Checkout
  • Complete Pump, Aqua-Flo, XP2, 1.5HP, 230v, 48 frame, 2"x 2", 1 or 2 Speed 7.7A
  • The inlet and outlet measures about 3" across the threads. Complete Pump, Aqua-Flo, XP2, 1.5HP, 230v, 48 frame, 2"x 2", 1 or 2 Speed
  • The inlet and outlet measures about 3" across the threads. Complete Pump, Aqua-Flo, XP2, 1.5HP, 230v, 48 frame, 2"x 2", 1 or 2 Speed
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..
  • Complete Pump, Aqua-Flo, XP2, 1.5HP, 230v, 48 frame, 2"x 2", 1 or 2 Speed 7.7A
  • Complete Pump, Aqua-Flo, XP2, 1.5HP, 230v, 48 frame, 2"x 2", 1 or 2 Speed 7.7A
  • Complete Pump, Aqua-Flo, XP2, 1.5HP, 230v, 48 frame, 2"x 2", 1 or 2 Speed 7.7A
  • Complete Pump, Aqua-Flo, XP2, 1.5HP, 230v, 48 frame, 2"x 2", 1 or 2 Speed 7.7A
MSRP: $649.95
$529.95
— You save $120.00

Description

This Pump is a 48Frame 230V 2 Speed with a 1.5 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 7.7 and low speed is 2.2 Amps..
 
Spa Pump Features:
  • Fine tuned impeller that moves water through the system with maximum performance
  • 2" suction and discharge
  • 48 and 56 frame versions
  • Thermally protected to extend life expectancy of motor
  • Multiple drain locations
 
Complete Pump Type
  Portable Spa Pump
Speed 2 Speed (2-Spd)
Motor Voltage 230v
Drain Plug Location 4,6,9 o`clock
Pump to Motor Foot Types 9
Suction Style Center
Suction Connection (Physical Dimension) 3-1/16"od
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Style Side
Discharge Connection (Physical Dimension) 3-1/16"od
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 1.5hp
Motor Frame 48 Frame Thru-Bolt
Motor Amperage/Wattage 7.7A/2.2A
Manufacturer AquaFlo/Gecko
Pump Model Flo-Master XP2
Manufacturer Impeller Number HTP35-402-1410
Volute Fastening Type 8 Screws
Volute/Sealplate Number 92770705

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 

For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example.

8.0 = 1 HP

10.0 = 2 HP

12.0 = 3 HP

14.0 = 4 HP

16.0 = 5 HP

 

For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP.

  8.0 = .5 HP

9.0-10.0 = .75 HP

10.0-13.00 = 1 HP

13.5-15.0 = 1.5 HP

16.0-20.0 = 2 HP

Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.

 

NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.

NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.

View AllClose

Related Products