Complete Pump, Aqua-Flo New Style Maelstrom, XP2e Equivalent, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.  

This pump is a new release from Aqua-Flo designed to be a less expensive replacement for Aqua-Flo XP2e 

This pump is a Complete Pump, Aqua-Flo New Style Maelstrom, XP2e Equivalent, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A with a 2" suction side and 2" pressure side which measures about 3" edge to edge.

The amperage is 12 Amps on High Speed and 3.5 Amps on Low making it a 3.0 Horse Power Pump..

Note: You need to be sure of your voltage by checking one of two things. Either the label on the pump which will say either 115V or 230V or you can look to see where the white wire from the pump is located in the pack if you can't see the label. If the white wire is on the red leg or #2 leg the pump is 230V if it is on the Neutral or the White AC leg. Always turn the breaker to the hot tub off before doing any of these checks.   

 If You need a pump Bleeder Barb Click here: Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

• Longer life capacitor with high temp. 85°C
• High ambient temperature run rated 60°C
• Maximum water temperature 50°C
• Sealed bearing
• Low energy in low speed
• Construction: High Speed - PSC, Low Speed - Resistance start
• Seal: Gecko high quality Universeal
• 2" intake and discharge
• Insulation Class F thermally protected
• UL approbation E62386
• California Title 20 Compliant

California Residents WARNING: Cancer and Reproductive Harm

  www.P65Warnings.ca.gov