Circuit Boards

This part is a Circuit Board, Balboa, Replacement Board for COLE2PDVR1A ,ELE09100232, 8 Pin Phone Cable, Blower or Pump 3 Option requiring an additonal small board.. Additional Information 2-speed Pump 2 is required, uses X-P332 expander board. To add...

This part is a Circuit Board, Balboa, VS520SZ, Serial Standard, 8 Pin Phone Cable, Blower or Pump 3 Option..  Additional Information 2-speed Pump 2 is required, uses X-P332 expander board. To add Blower or 1-speed Pump 3, use J17/26. Cord...

6600-720 formerly 6600-046, 6600-287, Sundance Spas, Jacuzzi, Sweetwater circuit board, without Circ Pump Logic. This board does not operate a circulation pump.   If the spa does have a circulation pump, then use this board Circ Pump Version...

Sundance/Jacuzzi/Sweetwater Circuit Board w/Circ Pump Only, LX-15. Used on Sundance Spas and Jacuzzi Spas. Replaces, 6600-046 (with circ pump eprom), 6600-088, 6600-288, 6000-167. Comes with latest Eprom Revision 3.61+.   Circuit boards are a...

This part is a Circuit Board, Balboa, CAL SPAS 6200 CIRCUIT BOARD Replacement. 8 PIN PHONE STYLE CONNECTION. CHIP NUMBER: CS6200R1(X) - CS6100R1(X) This circuit board replaces the discontinued CS6200 and CS6100 circuit boards Please Note: Circuit boards...

This part is a 33-0612-08 replacement circuit board that operates (2) Jet pumps or (1) Pump and Blower, Light and a Circulation Pump if equipped on some Artesian or South Seas Hot Tubs.. As of 2024 new VS501 circuit boards will come with the plug and...

This part is a New Balboa 2000LE M7 Spa Hot Tub Board. Watch the video for more information including some diagnostic tips.. This board does not use a pressure switch it has (2) M7 sensors.   Board is used with an E7 Topside and can run up to...

This part is aNew Balboa MS1500 Spa Hot Tub Board found in Master Spa Brand hot tubs. MASTER SPAS CIRCUIT BOARD 8 PIN PHONE STYLE CONNECTION    CHIP NUMBER: MS1500R1(X)    REPLACES X801025   Below Is a List of related...

This part is a VS504SZ Board that operates (2) Jet pumps and a Blower Or 3 Pumps..  Light and a Circulation Pump if equipped.. This board is used mostly with (6-7) Button Topsides.. Circuit Board Application Balboa Water...

This part is a Balboa Circuit board for an BP2000-G1 system it is a new board and can be found under several different numbers.. The compatible topside would be a MOLEX system plug not a phone plug.. The original board number would have been 56380 this...

This part is a Balboa BP series BP501G3 (Set-Up #1-3), works with TP Series Top Side Panel, Pump1-Blower/Pump2, 4 Pin Molex Connector. This board is used with TP Topsides only.. Circuit Board works in place of: Balboa 56585 HydroQuip 56961 Note -...

This part is a Circuit Board, Jacuzzi (Balboa), R574/R576R1, Value, 6 Pin Phone Cable..   Plug Connection - Phone Style Cable Chip Number - R574/R576R1(x) Circuit Board Application    JacuzziCircuit Board...