Air Venturi System Parts

This item is a 3 1/4" Wide 6 Spoke Graphite Gray Knob for 1" Air Control Valve Knob. The outside measurement is about 3 1/4" and the center hole is about 5/16".. NOTE: There is a Waterfall Control version of this knob that measures about 3 5/8" wide with...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing and (1) 3/8" x 3/8" Barbed Coupler..   This kit is used to Connect the 3/4" Barbed fitting on the water...

This part is a 1" Slip X 1" Street X 1" Street Tee X (8) 3/8" Barbs Air Manifold. The Manifold recieves a 1" pipe on one side and then slips into a 1" fitting on the other side and /or the top with (8) 3/8"...

This part is an Air Manifold, 1" Slip x 1" Slip, 3/8" Smooth Barb, 8 Port, Flow Thru, Pancake Style.. 1" Slip measures about 1 1/4" ID..    You can use this with this Barb for a 3/4" Tubing connection to this Manifold: 3/4" Smooth...

This Kit consists of 6" of 3/4" Inside Diameter Clear Tubing, (2) Clamps and (1) 1" Street x 3/4" Barb Coupler and (1) 1" Slip x 3/4" Barb Coupler.. This Kit is used to connect your old 3/4" flex pipe connection that is being replaced to a more modern...

This part is an Air Manifold , Transition Type, 1" Spigot  X (8) 3/8" Slip Barb..   You can use this with this Barb for a 3/4" Tubing connection to this Manifold: 3/4" Smooth Barb Adapter x 3/4" Slip / 1" Street 3/8" Tubing for use with this...

This part is a Sundance or Sweetwater brand Spa Air Venturi Control knob .. 780 Series Air Control 2003-2006   Jacuzzi, Sundance, Air Control, Venturi Body and Stem, 780, 880, Elite Series, J-300, J-400 Gasket, Jacuzzi, Sundance, Air...

This part is a Waterway 1" Spa Hot Tub Air Control Valve with the hidden type cap to be used under a larger handle style cap. You use this valve to replace the guts of an installed valve and don't use the body.. The Valve Cap Width is approx. 2 11/16".....

Waterway Air Control Handle Angled Lever Style Gray Square Hole size about 9/32" to fit on top of the air control..

This part is a Manifold that features (6) 3/8" Barbs and is Flow Thru, 1-1/2"slip x 1-1/2"spigot.. To plug the barbs you can use these plugs: Barb Plug 3/8" Slip for Air Manifold and more Waterway Set of (3) Barb Plugs 3/8" Slip for Air Manifold and...

This Kit consists of 4" of 3/4" Inside Diameter Clear Tubing, (2) Clamps. (2) 1" Street x 3/4" Barb Couplers and (2) 1" Couplers.. This Kit is used to connect your 1" pipe connection that is being replaced to a more modern outside barb type seal... You...

This part is a 90 degree slide on glue in style 1" slip adapter fitting. This fitting slides onto a 1" air control valve before you glue any plumbing to the bottom of the valve and then it gives you a 1" slip fitting on the side in a 90 degree fashion....