56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365

(No reviews yet) Write a Review
SKU:
HTP34-343-AEHE
Shipping:
Calculated at Checkout
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • Example of Label..
  • The Suction side of this pump measures about 3" Edge to Edge across the threads..
  • The Pressure side of this pump measures about 3" Edge to Edge across the threads..
  • Compare your motor shaft to these to be sure...
  • This part measures over 6 1/2" Wide... 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
  • 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365
MSRP: $579.99
$429.99
— You save $150.00

Description

This part is a (1) Speed 56 Frame Complete Intertek Pump that fits Jacuzzi Premium or Sundance brand Hot Tubs that have a band style base mount. These pumps usually have the part number WUA-400-I, and then 6500-352 or 6500-363 or 6500-365 on the label. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 15" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. 

If you need a Bleeder Barb that screws into this pump face Click Here: Barbed Bleeder Plug Intertek LX 48 or 56 Frame Wet End Fine Threads Jacuzzi® or Sundance®

If You need Tubing Extension Kit for the Bleeder Barb Click Here: Connection Kit, Glue Kit, 3/8" Tubing, 1/2" OD, 6" length for Air Systems or Jet Body Air Connections

NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump!

This model LX pump is commonly used to replace Sundance 2.5 HP 56 frame pump - 1 speed, 2" inlet, 2" discharge pumps 
Do Not be confused based on the Amperage this pump is 4.0HP but they want to call is 2.5hp..
Dimensions: 16-7/16"L x 8-3/4"W x 8-7/8"H
 
Manufacturer Lingxiao (LX) Pump
Pump Model 56WUA
Speed 1 Speed (1-Spd)
Motor Voltage 230v
Drain Plug Location 3,6,9 o`clock
Suction Style Center
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Style Side
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 4.0hp
Motor Frame 56 Frame Thru-Bolt
Motor Amperage/Wattage 12.0A
 
 

View AllClose

Related Products