Circuit Boards

This part is a 2 wire Pressure Switch Harness that fits some Balboa Boards.. Value, 2000, LE, SUV and more.. Circuit Board Application Balboa Water Group Circuit Board Type New Manufacturers Part Number LBLLC Circuit Board...

This part is a Used New Style 3 Lug Terminal Block found on many Balboa Brand Spa Hot Tub Boards. This terminal Block can get burned on one or two legs and if the soldered on finger terminals are good on the board you can replace this part and not buy a...

In this video The Spa Guy tells you the basics about diagnosing and replacing a M7 sensor on a Balboa Board.  Click this link for the m7 sensors on this site: M7 Sensor #sparepair #hottubrepair #spaguy...

This Item is a Board Fuse .05Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/8" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass but used ceramic to dissipate heat. You...

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components.. 6 position terminal block 5-3/16" overall length.

This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa B2DG and B240 Systems.   Circuit Board Application    Balboa Water GroupCircuit Board Model    B2DG, B240Circuit Board...

This part is a Control Box Cover that fits Balboa VS or GS Series Control boxes only..

This part is for a Set of (2) Standard Balboa Board Replacement Repair Relay made by Zettler. This Relay is the standard relay found on most Balboa Boards but it has double tabs on it so you can add jumpers from the tabs to the feed and load side of the...

You are purchasing a 3 Terminal Power Block found on many Control pack and board set ups..

You are buying a Cal Spa 7000 or 9000 Heater M7 foam type Sensor. This Sensor comes with the wire, Connector, and The foam sensor. It DOES NOT include the tube, the tube side mount or the pull ties. When this sensor is bad it will generally cause a SN...

This part is a PC Board Plastic Standoff Holder Kit 1/4" long, Reverse Lock Style, Pack of 12, Fits Balboa and some other Brands...  We also have the 3/4" Version Here: Click for 3/4" Standoff Kit 

This part is a PC Board Plastic Standoff Holder Kit 3/4" long, Reverse Lock Style, Pack of 12, Fits Balboa and some other Brands...  We also offer the 1/4" version of this part: For the 1/4" Standoff Kit Click Here