Wet End, Waterway, E-Series 1.0hp 1-1/2" Threaded, 48 Frame

This part is a 48Frame Center Discharge 1 1/2 x 1 1/2" 1HP Waterway Wet End.. The threads would measure about 2 3/8" Edge to Edge.. This wet end would be found on a 115V motor with an Amperage of about 12 Amps or a 230V motor with an Amperage rating of about 8 Amps.. The Waterway center discharge wet end with the 4 screws has been discontinued and replaced with the E-Series Center Discharge wet end by the manufacturer. Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end you have is to count the number of screws on the faceplate. The old center discharge pump had a 4-screw faceplate and the new E-Series has a 6-screw faceplate. If you need parts for the old center discharge wet ends, you will need to replace the whole wet end with a new E-Series Center Discharge wet end.

Pump to Motor Foot Types    15
Motor Frame    48 Frame Thru-Bolt
Drain Plug Location    3,6,9 o`clock
Suction Auxillary Port    None
Suction Style    Center
Suction Connection (Physical Dimension)    1-11/16"id, 2-7/16"od
Suction Connection Type    Female Pipe Thread (fpt), Male Buttress Thread (mbt)
Suction Pipe Size    1-1/2"
Discharge Auxillary Port    None
Discharge Style    Center
Discharge Connection (Physical Dimension)    1-11/16"id, 2-7/16"od
Discharge Connection Type    Female Pipe Thread (fpt), Male Buttress Thread (mbt)
Discharge Pipe Size    1-1/2"
Horsepower    1.0hp
Manufacturer    Waterway
Pump Model    E-Series Center Discharge