Wear Ring, Waterway, Hi-Flo, 1 13/16", Inside Diameter
(No reviews yet)
Write a Review
- SKU:
- HTP35-270-1493
- Shipping:
- Calculated at Checkout
-
Wear Ring, Waterway, Hi-Flo, 1 13/16", Inside Diameter
![Wear Ring, Waterway, Hi-Flo, 1 13/16", Inside Diameter]( "Wear Ring, Waterway, Hi-Flo, 1 13/16\", Inside Diameter")
-
Wear Ring, Waterway, Hi-Flo, 1 13/16", Inside Diameter
![Wear Ring, Waterway, Hi-Flo, 1 13/16", Inside Diameter]( "Wear Ring, Waterway, Hi-Flo, 1 13/16\", Inside Diameter")
Description
This part is a Wear Ring for a Hi-Flo Impeller found in Waterway Hi-Flo pumps only.. The Inside Diameter of the wear ring is 1 13/16"...
Related Products
Impeller, Waterway HiFlo, Side Discharge, 2.0hp, Hi-Flo Hi Flo
MSRP:
$46.46
$36.13
Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 2.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 2...
Impeller, Waterway HiFlo, Side Discharge, 3.0hp Hi-Flo Hi Flo
MSRP:
$46.46
$36.13
Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 3.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 3...
Impeller, Waterway, HiFlo, Side Discharge, 3/4hp Hi-Flo, Hi Flo
MSRP:
$46.99
$37.99
This item is a 3/4HP Waterway HiFlo Pump Impeller "B".. If Your motor is 115V the amperage would be about 11 Amp if 230V it would be about 7 amps..Closed face impeller made for the Hi-Flo...
Impeller, Waterway, HiFlo, Side Discharge, 4.0hp Hi-Flo, Hi Flo. Blue
MSRP:
$46.99
$37.99
Waterway 4 HP Hi-Flo closed faced impeller for Hi-Flo side discharge wetends that have part number 315-1160 on the rear. This impeller will fits motors that have a 230 Volt 12-13 amp rating.
The...
Wear Ring, Aqua-Flo XP2E, XP3, 1.5, 2.0, 2.5 & 4.0HP, 2 5/8" Inside Diameter
MSRP:
$10.43
$8.49
This part
Impeller & Seal Kit, Waterway, HiFlo, Side Discharge, 1.0hp Hi-Flo, Hi Flo
MSRP:
$66.99
$47.99
This item is a 1.0HP Waterway HiFlo Pump Impeller "C" Kit which included the Seal Kit as well.. If Your motor is 115V the amperage would be about 12 Amp if 230V it would be about 8 amps....
Impeller, Waterway, HiFlo, Side Discharge, 1.0hp Hi-Flo, Hi Flo, Code "C"
MSRP:
$46.99
$37.99
This item is a 1.0HP Waterway HiFlo Pump Impeller "C".. If Your motor is 115V the amperage would be about 12 Amp if 230V it would be about 10 amps..Closed face impeller made for the HiFlo...
Water Slinger, WaterWay Hi-Flo, Mustang, Executive
MSRP:
$6.49
$4.99
This part is the slinger found between the impeller and wet end and the shaft going into the pump motor bearing area and is designed to sling water away from the bearing in case of a seal leak...
Aqua-Flo, XP, Face, O-Ring, Wet End , Flo-Master, 6" Inside Diameter, 1/8" Thick
MSRP:
$9.99
$6.99
Aqua-Flo Xp2 Flo-Master 48Frame Pump Face O-Ring Only fits around the Face of a Xp Pump Face exclusively for An Aqua-Flo Xp 48 frame pump which has 2" inlet and outlet which measures about 3" across...