This 1.0 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Watkins Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 37334-03 on the label for a Watkins Version.
It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 15" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.
Dimensions: 15-3/16"L x 8-7/16"W x 8-7/16"H
NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump! Also note make sure you are choosing correctly between the 48 and 56 frame versions this one is a 48 which measures less than 6" across the back of the motor the 56 measures more than 6"..
If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..
Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads
Some Watkins will use this Bleeder Barb: Pump Bleeder Barb, Watkins, Wavemaster, XP2, XP2E, LX, 1/4" Barb x 1/4"Mpt
|Speed||2 Speed (2-Spd)|
|Drain Plug Location||3,6,9 o`clock|
|Suction Connection Type||Male Buttress Thread (mbt)|
|Suction Pipe Size||2"|
|Discharge Connection Type||Male Buttress Thread (mbt)|
|Discharge Pipe Size||2"|
|Motor Frame||48 Frame Thru-Bolt|
This product hasn't received any reviews yet. Be the first to review this product!