Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 5.0 HP Executive Wetend

(No reviews yet) Write a Review

SKU:: HTP34-270-1608
Shipping:: Calculated at Checkout

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 5 HP Executive Wetend
A 2" Threaded fitting measures about 3" edge to edge on the suction or pressure side..
A 2" Threaded fitting measures about 3" edge to edge on the suction or pressure side..
All Executive wet ends have this number 315-1260 on the back so you have to determine what impeller and suction size you have before ordering.. Meaning this number can be 14 different wet ends so don't use it to order..
A 56 frame Wet End wet end measures about 5 3/4" center to center in an x pattern..
A 56 frame Wet End wet end measures about 5 3/4" center to center in an x pattern..
A 56 frame Wet End wet end measures about 4 1/8" center to center in a square pattern..
This wet end can be turned and used in a 6 o'clock, 12 o'clock or 9 o'clock position by removing the thru bolts and turning it..
This wet end can be turned and used in a 6 o'clock, 12 o'clock or 9 o'clock position by removing the thru bolts and turning it..
Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 5 HP Executive Wetend

MSRP: $158.97

$114.99

— You save $43.98

Current Stock: 88

Quantity:

Description

Description

This part is a 5 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and Wear Ring.

The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3 5/8" between or 5 3/16" in a X Pattern and the 56 Frame will be 4 1/8" Between or 5 3/4" in a X Pattern. The pump amperage will be about 16.0 Amps at 230V that this wet end fits.. There are no 4HP at pumps that are 115v..

Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example. 8.0 = 1 HP 10.0 = 2 HP 12.0 = 3 HP 14.0 = 4 HP 16.0 = 5 HP NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.

Here are links to the other version of wet ends related to this type..

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 1 HP Executive Wetend

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 2 HP Executive Wetend

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 3 HP Executive Wetend

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 4 HP Executive Wetend

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 5 HP Executive Wetend

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 1 HP Executive Bleeder Barb Kit

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 2 HP Executive Bleeder Barb Kit

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 3 HP Executive Bleeder Barb Kit

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 4 HP Executive Bleeder Barb Kit

Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 5 HP Executive Bleeder Barb Kit

Spa Hot Tub Pump Air Bleeder Add On Kit 1/4" Mpt X 3/8" Barb with Sealer Fitting