Waterway Executive 4HP Impeller 1000 Seal & (2) Bearing Pump Wet End Hot Tub Spa How To Video

(2 reviews) Write a Review
SKU:
ASPps-1000Siliconexec4HPbearing2x
Shipping:
Calculated at Checkout
  • Waterway Executive 4HP Impeller 1000 Seal & (2) Bearing Pump Wet End Hot Tub Spa How To Video
  • These Impellers have been updated so the new Impeller will not match the old impeller in color or size but they are correct if you chose the correct one and will fit your old housing..
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video This is the old Style so your original Impeller should look something like this…
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video This is what the Seal side looks like in the Wet End this is for illustration only.. This listing so for the Impeller only seals are sold alone or in kist with this impeller in our store...
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video
  • Waterway Executive 4HP Impeller 1000 Seal & (1) Bearing Pump Wet End Hot Tub Spa How To Video
MSRP: $89.99
$79.99
— You save $10.00

Description

This Kit is features a 4HP Impeller, (2) Standard Bearings and 1000 Seal with Silicon and a Seal Install Tool that fits an Executive 48 Frame Wet End up to 3HP Motor and a 56 Frame Wet End 3HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace the Impeller. We offer a Seal and Silicone in a kit or an Impeller individually, and the Purpose of this Kit is to repair a Damaged Impeller and Seal inside the Wet End. This is (1) Impeller, (2) Bearings,  (1) Seal, (1) Tube Silicone & a Seal Install Tool ONLY!! 
Note: If you are not going to spend the time to make sure this is the correct part using the pictures and videos please don't buy from me. I did  all of the extra work to add pictures with measurements as well as videos so you can learn how to get the right part everytime.
 
 
Visit our eBay Store as we also offer these and other associated products and accessories for your Spa.ASP 310-4210,310-4210, waterway impeller, waterway pump, waterway impeller, waterway seal kit, waterway executive pump, water pump part, waterway pump parts, water way, 315-1220, 315-1220 waterway 
Note: Some of these impellers have the actual HP stamped in the front center of the impeller. 2,3 and 4HP usually do have a stamp the 1 and 5hp usually don't. Also note they have come out with a new replacement impeller that is supposed ot be better than the old style and they are direct replacements so don't expect the one I send you to look exactly like the original although the HP will be the same.
 



Note: A 115v motor that uses a 1 HP Impeller would show about 11-12.0 Amps on high speed a 230V motor would show about 8.0 Amps on High. See chart below for other Horsepowers. 

Do Not choose a Larger Impeller thinking that it will make your Hot Tub Stronger it will only damage the Motor and make it run hot on high speed as well as there are (2) different size wear rings on the impellers so if you choose a different size impeller your wear ring may not work. The 1-3HP wear rings are larger than the 4-5HP wear rings.
 
To determine the HP refer to the chart below.. 
The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. 
The 48 Frame will be 3 5/8" between or 5 3/16" in a X Pattern and the 56 Frame will be 4 1/8" Between or 5 3/4" in a X Pattern. 
You must go by the Amperage Sticker on the motor not stickers on the Wet End or Motor especially the BHP Stickers. 
Look on the label of the motor for the two amperages if you have a 2 speed pump or if its a single speed look for a single amperage. An example will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
 
115V Chart Below
3/4HP 8-9 Amps
1HP 11-12 Amps 
1.5HP 16-17 Amps 
2HP 19-20 Amps. 2HP would be very rare. 
 
230V Chart Below
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told incorrectly that they have 5 HP pumps.
If you do the math two 230V 5 HP pumps at 16 amps is: 32 amps. Plus a 5.5 KW heater is: + 21 amps.  
That means with both pumps running and the heater on it will draw  = 53 AMPS. 
I bet your HOT TUB is on a 50 AMP breaker…... Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump. 
View AllClose

2 Reviews

  • 5
    Wet End Parts

    Posted by Jeff Gravel on Aug 10th 2024

    What an amazing service you provide! Thank you all for all that you do.

  • 5
    WATERWAY EXECUTIVE 4HP IMPELLER 1000 SEAL & (2) BEARING PUMP WET END HOT TUB SPA HOW TO VIDEO

    Posted by Jeff Gravel on Nov 18th 2022

    How can I show my gratitude in words. Thank you SO much for the support, the superb how-to videos and the exceptional parts. Let's face it, hot tubs can be very expensive to repair. I'm not afraid to tackle repair projects of any kind, and you've done your part to put this stuff out there to help us all save a lot of money! My hat is off to you. Thank you once again, and I'll be back!

View AllClose

Related Products