Water Manifold, Base Glue Kit, 2" with (8) 3/4" Outputs & Coupler Video How To

(No reviews yet) Write a Review
SKU:
ASP2manifold2+6deadendflexcouplerglue
Shipping:
Calculated at Checkout
  • Water Manifold, Base Glue Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Glue Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
  • The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
  • The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
  • The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
  • The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
  • The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
  • The 2" Flex Pipe is 6" Long..
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • The 2" Piece of pipe measures 2 3/8" OD..
  • This coupler is used to connect the old 2” Pipe to the new Manifolds..
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • This coupler is used to connect the old 2” Pipe to the new Manifolds..
  • Water Manifold, Base Glue Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
MSRP: $101.99
$64.99
— You save $37.00

Description

See the Informational videos here first. This Kit is a 2" Spigot X Dead End X (6) 3/4" Barbs + 2" Street x Slip x (2) 3/4" Barb Manifold Basic Glue Replacement Kit. Note: 2"= 2 3/8" in PVC Plumbing. The Kit consists (8) Barbs Total with 2 Manifolds: (6) 3/4" Barbs & Manifold with (2) 3/4" Barbs, (1) Plug for 3/4" Barbs, a 2" Coupler, 4oz Blue Glue, 4oz Purpler Primer and 6" of 2" Soft Pipe. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side which would measure about 2 3/8" OD and then slips inside of the other manifold and then a 2" fitting glues in on the other side that would measure about 2 3/8" ID.
 




View AllClose

Related Products