Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End

(No reviews yet) Write a Review
SKU:
HTP35-270-BOCELEESealKit(1)bearing
Shipping:
Calculated at Checkout
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
  • This kit fits a wet end that looks like this..
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
  • Viper Impeller, (1) Bearing & Seal Kit, 4.0hp, Waterway, Pump 2 1/2" x 2 1/2" Wet End
MSRP: $89.99
$61.99
— You save $28.00

Description

This kits is a Waterway Viper Pump 4.0 Impeller, (1) Bearing, Seal, Install Tool and Silicone.. A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...I have found this 4HP pump impeller to be on a 12amp motor...

This pump uses a different seal than all other Waterway pumps click below for the parts related to this pump: 

Waterway Viper Shaft Seal Kit, Silicon & Tool Buna

Waterway Viper Shaft Seal Kit, (1) Bearing, Silicon & Install Tool

Waterway Viper Shaft Seal Kit, (2) Bearing, Silicon & Install Tool

Viper, Face O-Ring, Waterway, Pump 2 1/2" x 2 1/2" Wet End

Viper, Wear Ring, Impeller , Waterway, Pump 2 1/2" x 2 1/2" Wet End

Viper, Volute, Waterway, Pump 2 1/2" x 2 1/2" Wet End

Viper, Face Plate, Waterway, Pump 2 1/2" x 2 1/2" Wet End

Screw, WaterWay, Executive, E-Series,Hi-Flo,Viper,Workman,EX2, 8-32 x 5/8"

Bleeder Drain Plug & O-Ring , 3/8", Waterway Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More

O-Ring for Hot Tub Spa 2 1/2" Pump Union for Viper Xp3 Some Executive

 

 

Closed face impeller made for the Viper pump by Waterway Plastics. Rated at 4.0hp, it is used in a Waterway Viper pump wetend, and must be installed on a 4.0hp (or greater) thru bolt motor.

Impeller Type Closed Face
Impeller Diameter OD 3-5/8"
Vane Width ID 7/8"
Eye Diameter OD 2-5/8"
Eye Length 5/8"
Impeller Width OD 1-1/16"
Seal Seat Depth n/a
Shaft Length 1-1/16"
Shaft Diameter OD 7/16"
Seal Seat Diameter OD n/a
Manufacturer Waterway
Pump Application Viper




View AllClose

Related Products