Waterfall Control Valves & Related Parts

This item is a 3 5/8" wide 6 Spoke Watefall or Neck Jet Control Diverter Knob, Diverter Cap and O-ring Kit for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small...

This part is a Waterway Water Feature Arc Style Fountain with 2 1/8" Face in Dark Silver Glitter.. This part is a Topmount style with a 3/4" Barb..  If you need the parts inside of this or the cap they are not sold seperately.. 

This part is a 2 1/4" Wide cap  1"slip x 1"slip x 1"slip Notched Spa Small Diverter Complete Assembly Gray Valve.  This Valve can be found on a few brands but is a very rarely used valve... You may have a Waterfall Control valve...

This part is a Set of (5)  3/4" Barb x 3/4" Smooth Barbed Couplings used to couple 3/4" ID Tubing together. 3/4 Inch Barb X 3/4 Inch Barb..  Note: We only use smooth barbs now because the barbed style does not fit every tubing style and the...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing with (1) 3/8" x 3/8" Barbed Coupler and 4oz of Blue Glue.. This kit is used to Connect the 3/4" Barbed...

This Kit is designed to repair a Artesian Waterway Pop Up Style Waterspout Fountain Top that has a pre-made Gasket that goes bad.. You cannot buy the gasket you have to buy the whole fountain or use this kit to repair it.. Watch the Video to see how...

This valve is No Longer Available.. This part is a Horizontal 2 1/4" Wide cap  1"slip x 1"slip x 1"slip Waterway Scalloped Spa Small Waterfall or Neck Jet Control Complete Assembly Gray Valve.  This Valve can be found on a few brands...

This part is a Black Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by CMP, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of each...

This part is a Gray Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by CMP, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of each...

This is a Gray Plastic Cover for the Waterfall of some J-300 Series Jacuzzi Premium Hot Tubs and fits the year models (2002-2006), This cover is about 8 3/4" log X 4 1/4" Wide and snaps on top of the waterfall assembly.. Note: Please take the time...

THis part is a Gray Waterfall Valve that is a Universal Valve with a shell hole size of 2" and a sleeve size of 1 3/4".   This kit includes The Valve with a Gray cap, and (2) Straight glue in barbs.   NOTE: We offer a kit with a 90...

You are Buying an Approximately 2 1/4" Wide cap  1"slip x 1"slip x 1"slip WaterWay Scalloped Spa Small Diverter Complete Assembly Black Valve.  This Valve can be found on a few brands but is a very rarely used valve... You...