Waterfall Control Valves & Related Parts

This item is a 3 5/8" wide 6 Spoke Watefall or Neck Jet Control Diverter Knob, Diverter Cap and O-ring Kit for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small...

Two tone Marquis Spa 1" on/off valve for the neck jets. This assembly includes cap, handle, valve ste, body and all o-rings to either transfer to your existing plumbing or to replumb completely. If replumbing you may need 1" to 3/4" barbed adapters. The...

This part is a Waterway Water Feature Arc Style Fountain with 2 1/8" Face in Dark Silver Glitter.. This part is a Topmount style with a 3/4" Barb..  If you need the parts inside of this or the cap they are not sold seperately.. 

This part is a Star Handle Valve , Waterfall or Neck Jet Control, On/Off Valve, Silver and Graphite, 1" Slip x 1" Slip, Single Port.. To connect the valve to 1" plumbing simply glue inside of each Slip ports which would measure about 1 1/4" ID and we...

This part is a "S" Handle Valve , Waterfall or Neck Jet Control, On/Off Valve, Silver and Graphite, 1" Slip x 1" Slip, Single Port. To connect the valve to 1" plumbing simply glue inside of each Slip ports which would measure about 1 1/4" ID and we will...

This part is a Set of (5)  3/4" Barb x 3/4" Smooth Barbed Couplings used to couple 3/4" ID Tubing together. 3/4 Inch Barb X 3/4 Inch Barb..  Note: We only use smooth barbs now because the barbed style does not fit every tubing style and the...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing with (1) 3/8" x 3/8" Barbed Coupler and 4oz of Blue Glue.. This kit is used to Connect the 3/4" Barbed...

This Kit is designed to repair a Artesian Waterway Pop Up Style Waterspout Fountain Top that has a pre-made Gasket that goes bad.. You cannot buy the gasket you have to buy the whole fountain or use this kit to repair it.. Watch the Video to see how...

This valve is No Longer Available.. This part is a Horizontal 2 1/4" Wide cap  1"slip x 1"slip x 1"slip Waterway Scalloped Spa Small Waterfall or Neck Jet Control Complete Assembly Gray Valve.  This Valve can be found on a few brands...

This 1" CMP Waterfall Control Plunger Replacement Kit that includes the Cap, Handle, PLunger Assembly and o-rings.. This kit is found in some 1" CMP Waterfall or Neck Jet Control valves.  NOTE: This Plunger looks a lot like the Waterway Brand...

This part is a Black Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by CMP, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of each...

This part is a Gray Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by CMP, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of each...