Waterfall Control Valves & Related Parts

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing and (1) 3/8" x 3/8" Barbed Coupler..   This kit is used to Connect the 3/4" Barbed fitting on the water...

This item is a 6 Spoke 3 5/8" Wide Diverter Knob for a 1" Waterfall or Neck Jet Control.. The outside measurement is about 3 5/8" and the center hole is about 1/2".. NOTE: There is an Air Control version of this know that measures about 3 1/4" wide...

This part is a Cal Spa Silver Waterfall Control Cap 2 9/16" Wide Teardrop Style  only.  This Waterfall Cap Slides on the Diverter Valve Stem is used to operate the Wateffall Control Valve and is for Cal Spas.   This Part is...

This part is a 2 1/2" Titanium colored 1" Waterfall or Neck Jet Control Cap.  This Cap Screws onto the Control Body that measures about 1 3/4" wide and Slides over the Diverter Valve Stem is used to operate a Waterfall...

Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...

This Kit is designed to repair a Artesian Waterway Pop Up Style Waterspout Fountain Top that has a pre-made Gasket that goes bad.. You cannot buy the gasket you have to buy the whole fountain or use this kit to repair it.. Watch the Video to see how...

This 1" Waterfall Control Plunger and Cap Replacement Kit is found in some 1" Waterfall or Neck Jet Control valves. This kit features the Cap, plunger and stem, The Gasket for the bottom of the plunger and clip that holds the stem inside the cap and an...

This Kit is a 3/4" Spin To Win Glue Kit for 3/4" Plumbing repairs where you are connecting old 3/4" Plumbing that measures about 1" OD to new plumbing.. The kit includes a 6" Piece of 3/4" Flex Pipe that measures about 1" OD and a 3/4" Coupler and (1)...

This 1" CMP Waterfall Control Plunger Replacement Kit that includes the Cap, Handle, PLunger Assembly and o-rings.. This kit is found in some 1" CMP Waterfall or Neck Jet Control valves.  NOTE: This Plunger looks a lot like the Waterway Brand...

This Kit is a 3/8" Tubing Connect Kit with Glue for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...

This Kit is a 1/2" Spin To Win Glue Kit for 1/2" Plumbing repairs where you are connecting old 1/2" Plumbing that measures about 3/4" OD to new plumbing.. The kit includes a 6" Piece of 1/2" Flex Pipe that measures about 3/4" OD and a 1/2" Coupler and...

This Kit is a 1" Spin To Win Glue Kit for 1" Plumbing repairs where you are connecting old 1" Plumbing that measures about 1 1/4" OD to new plumbing.. The kit includes a 6" Piece of 1" Flex Pipe that measures about 1 1/4" OD and a 1" Coupler and (1) 4oz...