Waterfall Control Valves & Related Parts

This part is a 2 1/4" Wide cap  1"slip x 1"slip x 1"slip WaterWay Scalloped Spa Small Diverter Complete Assembly Gray Valve.  This Valve can be found on a few brands but is a very rarely used valve... You may have a Waterfall...

This item is a Gray 2 1/2" Notched Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that...

This item is a Gray Notched Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that measures...

This item is a Light Gray Handle used on a Waterway Waterfall or Neck Jet control only.. Note: this looks similar to an Air Control Handle but they are different.. The main thing is the Square part that slides on the valves stem...

This item is a Dark Gray Handle used on a Waterway Waterfall or Neck Jet control only.. Note: this looks similar to an Air Control Handle but they are different.. The main thing is the Square part that slides on the valves stem it is about...

This part is a Barb Adapter, 3/4" Barb x 1" Slip.. That means that it will accept 3/4" Inside Diameter Tubing on the barbed side and a 1" Pipe or Fitting that would measure about 1 1/4" Outside Diameter on the slip side.  Barb Fitting Type Barb...

This item is a Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that measures about 1 1/2" center to center...

This part is a Gray Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of...

This item is a Clip that is used to hold the stem inside of the top cover cap on 1" Waterway Single Port On/Off Valves only..  Click here for the complete kit:   Internal Kit, Plunger Style, Waterfall Control, Diverter Valve, 1"

This item is a Black Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that measures about 1 1/2"...

This part is a Barb Adapter 3/4" Barb x 1" Street or 3/4" Inside Slip..

This part is a 3/4" x 3/4" Smooth Barbed Coupling used to couple 3/4" ID Tubing together. 3/4 Inch Barb X 3/4 Inch Barb..  Note: We only use smooth barbs now because the barbed style does not fit every tubing style and the smooth style does.. ...