Valves All Types Ball, Check, Diverter, etc...

Genuine Jacuzzi 1" on/off waterfall control valve assembly in gray and black two tone design. Used on the 2015+ J500 series and others. This assembly includes the handle, cap, gaskets/o-rings and body. If you just need the cap and handle this is still...

This Kit is a 2" Sweep Pump Union To Plumbing Connect Kit found in many Hot Tubs.   The 2" Sweep Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" Street X Slip 90° fitting on...

This part is a "S" Handle Valve, Dan Kit, Waterfall or Neck Jet Control, On/Off Valve, Silver and Graphite, 1" Slip x 1" Slip, Single Port. This kit can be found in many brands like Premium Leisure, Pinnacle and More. To connect the valve to the original...

This part is a Set of (10) 3/4" Barb x 3/4" Smooth Barbed Coupling used to couple 3/4" ID Tubing together. 3/4 Inch Barb X 3/4 Inch Barb..  Note: We only use smooth barbs now because the barbed style does not fit every tubing style and the...

This Kit is a 3 3/4" Diverter Zone Control Selector Handle, 4" Diverter Cap, Stem Gate & O-Ring Kit to fit a Marquis Brand Hot Tub. This Diverter handle Slides on the Diverter Valve Stem is used to operate the Diverter Valve. The Cap...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...

This New Old Stock part is a Complete Hot Tub Spa Part Gray 11" Waterfall Assembly 3 Hole Style Graphite Gray Hole size is about 1 3/4" each.. You will get a 90 degree 3/4' Barb with the waterfall.. These Waterfalls are hard to come by but we do have...

The New Style replacement kit for this can be found here: Marquis Gray Diverter 3 3/4" Zone Control, Selector Handle, Threaded Cap, Gate & O-Ring Kit This Kit is a 3 3/4" Diverter Selector Handle, 4" Diverter Cap, Stem Gate & O-Ring Kit to fit a...

This part is a Slice, Gate Valve, Waterway, 2-1/2" Slip x 2-1/2" Spigot, Coast Spas and Others... The OD of the Street Spigot side measures about 2 7/8" and the ID of the Slip side measures about 2 7/8"..   This is a very unusual valve and an odd...

This New Old Stock part is a Complete Hot Tub Spa Part Gray 10" Aqua Fall Waterfall Assembly with Screws and a 1" slip water connection.. This can be a replacement part for an old waterfall or a new install.. If newly installing it will require some...

This part is a 1-1/2" Slip (2"Spigot) on each end Clear Check Valve found on Watkins Hot Tubs HotSpring 1989 To Present and All Tiger River Models..   

Note This Stem is no longer available Click this link for the Updated Replacement..  Sundance, Jacuzzi Premium, 2002+ Diverter Stem, New Style   You are Buying a Stem Gate Valve for a 2003 and under Sundance® Hot Tub Diverter. This...