Valves All Types Ball, Check, Diverter, etc...

Note: This part has been updated by the manufacturer so the new one will look different than the original.. The reason for the design change is to take the water pressure off of the cap to prevent lakes and cap issues. The new one will only have one...

This Kit is a Set of (2) Jacuzzi J Pump Style Pump Unions with 1 1/2" Slice Valves. The 1 1/2" Slice valve will glue inside the J pump union then you glue your 1 1/2" pipe which measures about 1 7/8" OD into the slice valve. The J Pump Union receives...

This part is aSet of (2) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valves and (2) 1 1/2 X 2" Heater Unions with Gasket. The Valve receives a 1 1/2" pipe or fitting on one side that would measure about 1 7/8" OD and then slips...

This kit is a Set of (2) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valves and (2) 1 1/2" Heater Unions with Gasket or Oring that matches the Unions. The Valve recieves a 1 1/2" pipe or fitting on one side and then slips...

Thius kit is a set of (2) 2" Spigot X 2" Slip Slice Gate Valves and (2) 2" Heater Unions with Gasket or Oring that matches Unions. The Valve recieves a 2" pipe or fitting on one side and then slips inside of a 2" fitting...

This Parts is a Kit that consists of (2) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valves and (2) 1 1/2" Pump Unions with Gasket or O-Ring that matches Unions. The Valve receives a 1 1/2" pipe or fitting that would measure about 1...

You are buying a Kit that consists of (2) 2" Spigot X 2" Slip Slice Gate Valves and (2) 2" Pump Unions with Gasket or O-Ring that matches Unions. The Valve receives a 2" pipe or fitting on one side and then slips inside of a 2"...

This Kit is a Set of (2) 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi® J Style Pump Unions with O-rings, (2) 2" Street x Slip Slice Gate Valve and (2) 2" Couplers for glueing 2" plumbing to the slice valve...

You are buying a Set of (2) 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes (2) Split Nuts , (4) Screws, (2) 2" Slip X 2" Threaded Unions and gaskets for use with a 2" Heater Union as well as (2) 2" Slip x 2" Street...

This part is a New Style Stem Gate Valve for a JACUZZI® or Sundance Hot Tub Diverter. The old Style is obsolete.. This Diverter Stem Slides into the Diverter Valve body under the cap and is used to Divert water when the handle is...

This part is a Gate Valve, Unibody, Magic, 2-1/2"s x 2-1/2"spg, 80psi.. If you want a lock for this valve click this link to add the lock: 2 1/2" Gate Valve Lock Manufacturer Magic Plastics Gate Valve Complete Unibody Valve First Plumbing...

The "Smart" Check is equipped with a 1/2Ó lb spring-loaded gate mechanism, allowing the valve to be installed in virtually any orientation.