Valves All Types Ball, Check, Diverter, etc...

Diverter stem for the Waterway Top Access 1" diverter valves. This style diverter stem is not as common and is used in Waterway diverter valves that were designated as Single Side Outlet.  Please review the pictures to be sure you have the correct...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing and (1) 3/8" x 3/8" Barbed Coupler..   This kit is used to Connect the 3/4" Barbed fitting on the water...

This part is a Cal Spa Silver Waterfall Control Cap 2 9/16" Wide Teardrop Style  only.  This Waterfall Cap Slides on the Diverter Valve Stem is used to operate the Wateffall Control Valve and is for Cal Spas.   This Part is...

This Kit is an Marquis Spa Hot Tub Gray, O-Ring Kit fits 4" Diverter Cap with 3" Style Thread.  This Diverter handle Slides on the Diverter Valve Stem is used to operate the Diverter Valve. The Cap screws down onto the existing diverter...

This item is a slice valve stem lock keeper to stop 2 1/2" Magic Plastics Slice Gate Valves from vibrating shut. Note: This lock will not work on all brands of slice valves because the stem is different lengths on other brands but will work on most. This...

This part is a Gray Textured 3 3/4" Spa Diverter Cap only.  This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the...

This part is a Gray Smooth 5 Scallop 3 3/4" Spa Diverter Cap only.  This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the...

This part is a Drain Cap with a Pull Handle for a Waterway Brand On/Off Valve, Water Hose Cap... Note: Colors can vary Black, White or Green NOTE: This Cap will only work on Waterway Brand Drains do not order for any other brand.. I put an example of...

This part is an Air Check Valve with a 1" Slip Fittings on one end. This valve is used above the water line to allow constant air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. This type Check...

This part is a Stem Washer for a Gate Valve on 2003 and under Sundance® Hot Tub Diverter. This Diverter Stem washer Slides onto the Diverter top under the cap.   Click this link for other Sundance Diverter Parts: Sundance® Diverter...

This part is a Watkins Diverter Bezel Cover White 33833 for some 1993-2003 Hot Spring tubs.. 

This part is a Black Textured 5 Scallop 3 5/8" Spa Diverter Cap only. This is a Buttress Cap if your cap has the word Buttress stamped in it this cap is correct. This Diverter Cap mounts on top of the Diverter Valve with the Stem...