Valves All Types Ball, Check, Diverter, etc...

This part is an Air Check Valve Kit with a 1" Air Check Valve a (4) 3/8" Barb Transistion Manifold with (2) Plugs that can be down to (2) Barbs and a 4oz can of glue to glue it all together. This valve is used above the water line to allow constant...

This part is a Drain Valve with 1/2" inch Slip Glue In style fitting.. If you need to make this a barb style click here for the kit: 3/4" Tubing Barb Connect Kit with Glue, 3/4" Barb x 3/4" Smooth Barb with Clamps and Tubing For the Large Valve Click...

This part is a Halo Style Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 3/4" Barb x 3/4" Barb Single Port.. To connect the valve to 3/4" plumbing simply glue...

This Kit is designed to repair a Artesian Waterway Pop Up Style Waterspout Fountain Top that has a pre-made Gasket that goes bad.. You cannot buy the gasket you have to buy the whole fountain or use this kit to repair it.. Watch the Video to see how...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap only for a Jacuzzi Premium J-230 2008+ and J-270-280 2007+.. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap & O-ring Kit only that fits J-200 Series Hot Tubs for a Jacuzzi Premium J-230 2008+ and J-270-J280 2007+. This Diverter Knob has a S Shaped...

This part is a Diverter Kit with a Stem, Silver "S" Style 4 5/16" Long Diverter Handle, Graphite 3 11/16" Graphite Cap & O-ring Kit for a Jacuzzi Premium J-230 2008+ and J-270-280 2007+. This Diverter Knob has a S Shaped Top and mounts on...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...

This part is a Black Textured 3 5/8" Spa Diverter Valve Stem, Cap and Handle Knob & O-Ring Kit only. This is a Buttress style Cap if your cap has the word Buttress stamped in it this part is correct. This Diverter Cap mounts on...

This part is a Black Textured 3 5/8" Spa Diverter Cap and Handle Knob & O-Ring Kit only. This is a Buttress style Cap if your cap has the word Buttress stamped in it this part is correct. This Diverter Cap mounts on top of the...

This part is a Diverter Kit with a Stem, Silver "S" Style 4 5/16" Long Diverter Handle, Graphite 3 11/16" Graphite Cap & O-ring Kit. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap & O-ring Kit only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide...