Valves All Types Ball, Check, Diverter, etc...

This New Old Stock part is a Complete Hot Tub Spa Part Gray 10" Aqua Fall Waterfall Assembly with Screws and a 1" slip water connection.. This can be a replacement part for an old waterfall or a new install.. If newly installing it will require some...

 This Kit is a RENU Kit with a Gray Waterfall Valve that is a Universal Valve with a shell hole size of 2" and a sleeve size of 1 3/4", (3) Straight 1" Slip x 3/4" Barb Glue Barbs and (1) 90 Degree 1" Slip x 3/4" Barb Glue Barbs, 10"...

This part is a 1-1/2" Slip (2"Spigot) on each end Clear Check Valve found on Watkins Hot Tubs HotSpring 1989 To Present and All Tiger River Models..   

Note This Stem is no longer available Click this link for the Updated Replacement..  Sundance, Jacuzzi Premium, 2002+ Diverter Stem, New Style   You are Buying a Stem Gate Valve for a 2003 and under Sundance® Hot Tub Diverter. This...

Note: This part has been updated by the manufacturer so the new one will look different than the original.. The reason for the design change is to take the water pressure off of the cap to prevent lakes and cap issues. The new one will only have one...

This Kit is a Set of (2) Jacuzzi J Pump Style Pump Unions with 1 1/2" Slice Valves. The 1 1/2" Slice valve will glue inside the J pump union then you glue your 1 1/2" pipe which measures about 1 7/8" OD into the slice valve. The J Pump Union receives...

This part is aSet of (2) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valves and (2) 1 1/2 X 2" Heater Unions with Gasket. The Valve receives a 1 1/2" pipe or fitting on one side that would measure about 1 7/8" OD and then slips...

This kit is a Set of (2) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valves and (2) 1 1/2" Heater Unions with Gasket or Oring that matches the Unions. The Valve recieves a 1 1/2" pipe or fitting on one side and then slips...

Thius kit is a set of (2) 2" Spigot X 2" Slip Slice Gate Valves and (2) 2" Heater Unions with Gasket or Oring that matches Unions. The Valve recieves a 2" pipe or fitting on one side and then slips inside of a 2" fitting...

This Parts is a Kit that consists of (2) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valves and (2) 1 1/2" Pump Unions with Gasket or O-Ring that matches Unions. The Valve receives a 1 1/2" pipe or fitting that would measure about 1...

You are buying a Kit that consists of (2) 2" Spigot X 2" Slip Slice Gate Valves and (2) 2" Pump Unions with Gasket or O-Ring that matches Unions. The Valve receives a 2" pipe or fitting on one side and then slips inside of a 2"...

This Kit is a Set of (2) 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi® J Style Pump Unions with O-rings, (2) 2" Street x Slip Slice Gate Valve and (2) 2" Couplers for glueing 2" plumbing to the slice valve...