Valves All Types Ball, Check, Diverter, etc...

This part is a Gray Notched 3 3/4" Spa Diverter Cap only.  This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the Diverter Valve with...

This item is a slice valve stem lock keeper to stop 2" Magic Plastics Slice Gate Valves from vibrating shut. Note: This lock will not work on all brands of slice valves because the stem is different lengths on other brands but will work on most.

You are buying on a 1 1/2" Slip X 1 1/2" Slip Slice Gate Valve. The Valve recieves a 1 1/2" pipe or fitting (Which is about 1 7/8" outside diameter) on each side. This part is used in hot tubs to stop the water so you could service the heater or the pump...

This part is a 2" Spigot X 2" Slip Slice Gate Valve. The Valve receives a 2" pipe or fitting (Which is about 2 3/8" Inside Diameter) on one side and then slips inside of a 2" fitting (Which is about 2 3/8" Outside Diameter) on...

This part is a Barb Adapter 3/4" Barb x 1" Street or 3/4" Inside Slip..

This part is a 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union receives a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the other...

This part is a 3/4" x 3/4" Smooth Barbed Coupling used to couple 3/4" ID Tubing together. 3/4 Inch Barb X 3/4 Inch Barb..  Note: We only use smooth barbs now because the barbed style does not fit every tubing style and the smooth style does.. ...