Valves All Types Ball, Check, Diverter, etc...

This part is a Gate Slice Valve, 3 pc, Valterra, 2"slip x 2"slip, 45psi..With plastic paddle. Reliable 3-piece body design allows unrestricted water flow and is easily disassembled for in-line servicing. Internal seals and paddles conform with ozone...

This part is a Spa Drain and Fill Valve made by Waterway. Usually found mounted to the spa base or skirting for easy access. The valve requires a 1-5/8" hole size and is locked to your spa with a retinaing nut that uses a 1-5/8" Acme thread. The plumbing...

The "Smart" Check is equipped with a 1/2Ó lb spring-loaded gate mechanism, allowing the valve to be installed in virtually any orientation.

1/2 lb Spring Check Valve

Spa Air Valve1-1/2"s socket or 2"spg1/4 lb. spring, clear body

This part is a Gate Valve, 3 pc, Valterra, 1-1/2"slip x 1-1/2"slip, 45psi with plastic paddle. Reliable 3-piece body design allows unrestricted water flow and is easily disassembled for in-line servicing. Internal seals and paddles conform with ozone...

This part is a Gray Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of...

3-Piece Gate Valve AssemblyWith plastic paddle. Reliable 3-piece body design allows unrestricted water flow and is easily disassembled for in-line servicing. Internal seals and paddles conform with ozone specs and the shaft is protected with a triple...

This part is a 2" Spigot X 2" Slip Slice Gate Valve. The Valve recieves a 2" pipe or fitting (Which is about 2 3/8" Inside Diameter) on one side and then slips inside of a 2" fitting (Which is about 2 3/8" Outside Diameter) on the other side. This part...