Digital Electronic Topside Controls

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

Duplex Digital and Super Digital/M-1 Replacement Boards This board requires a 120v power supply and can work with any DuplexDigital. It is found on the Balboa M-1 system. Balboa circuit boards are marked with a ÒChip NumberÓ that is located...

Analog Duplex PanelThis panel replace duplex product and utilize a "phone plug" type connector, 8 cord length. Topside Type    ElectronicTopside Complete    Complete TopsideManufacturer    Balboa Water...

2000 Value Replacement BoardReplacement boards for 2000 Value systems. This board is compatible with Duplex Digital and Lite Duplex Digital panels. The following topside(s) are compatible with the above circuit board: 58-138-1142, 58-138-1143,...

Note: This board is Obsolete but you can use this board: Replacement for this Board.. This Balboa Board is a VS-500 meaning it is a one jet pump board that will run a 12V light and a Circulation Pump also if equipped... This board can be found under all...

Dimensions 3-1/4Óx7Ó This TSC-8/K-8 control panel will work with most MSPA systems, has 8 buttons including a filtration cycle button, and will control dual pumps and an air blower. It has an LCD display and comes with a 10ft cord. This topside also...

This part is a Balboa 8 Button Topside that is called a Balboa E8 with a Molex plug end. This means it is capable of having 8 buttons but you will find this sometimes with 6, 7 or 8 buttons... You will also find a similar size and shape and look topside...

This part is a VS300 Board that operates (1) Pump and Light..   If your board has this chip number VS300FLXR1(x) with any number in the X position this board is correct.. This board is used with (4) Button Topsides..   This board can...