Topside Controls (Control Buttons)

This part is a Master Spa 8 Button Overlay for Master Spa Legend Series 2005-2012 Topside for a Three Pumps with Light. This Overlay can be used to replace your original Overlay with your brand on it as long as the button configuration works out...

This Item is a Board Fuse .05Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/8" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass but used ceramic to dissipate heat. You...

This part is a Balboa 6 Button Overlay for a Topside for a Two Pump with Light System. On the overlay starting at the left of the readout it reads Jets, Jets, Light and Warm, Mode, Cool. This Overlay can be used to replace your original Overlay with...

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components.. 6 position terminal block 5-3/16" overall length.

This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa B2DG and B240 Systems.   Circuit Board Application    Balboa Water GroupCircuit Board Model    B2DG, B240Circuit Board...

This part is a Balboa E4 4 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.        The button configuration of Jet, Jet, Temp and Light left to right. Make sure your old topside does not have a raise area for...

This part is a Control Box Cover that fits Balboa VS or GS Series Control boxes only..

This part is for a Set of (2) Standard Balboa Board Replacement Repair Relay made by Zettler. This Relay is the standard relay found on most Balboa Boards but it has double tabs on it so you can add jumpers from the tabs to the feed and load side of the...

This part is a Balboa E4 4 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.        The button configuration of Blower, Jet, Temp and Light left to right. This Overlay can be used to replace your original...

This part is a 8 button Overlay that fits TSC-4, K-4 control panels systems set up with 2 pumps. This Overlay features 8 buttons.. If you are looking for the complete Topside Click this Link: Topside, Gecko TSC-4,K-4, 8 Button, 2 Pump, Direct...

This part is a 10 button Overlay that fits TSC-4, K-4 control panels for MSPA systems set up with three pumps. This Overlay features 10 buttons.. If you are looking for the complete Topside Click this Link: Topside, Gecko TSC-4,K-4, 10 Button, 3 Pump,...

This part is an Overlay for a Balboa 8 Button Topside that is called an E8. The topside it fits is sometimes called a ML700 or E8 and features (2) Pumps, Blower, Light, Temp Up & Down, Time, Mode/Prog.. Complete Topside part number is here: Topside,...