Topside Controls (Control Buttons)

This part is a Raindance E2 2 Button Overlay for a 4-1/16" x 1-13/16" Rectangle Topside.          The button configuration of Light/Jet and Temp.   Make sure your old topside does not have a raise area for...

This part is a Raindance E4 3 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.          The button configuration of Jet, Temp and Light left to right.     This Overlay can be used to replace your...

Balboa BPBEE Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower and a Light..    You would reuse your amp...

This part is a Cool Nights Balboa 7 Button Overlay for a VL701 Topside for a (2) Pump and a Blower. This Overlay can be used to replace your original Overlay no matter what brand as long as the button configuration works out. On the overlay starting...

This part is a Cool Nights Series Spas Overlay VL260 1 Pump Large Oval 4 Button Balboa. This is an oval overlay is 6 9/16" Long and 1 5/8" wide.  To the Right of the screen follows: Pump 1, Light, Temp Down and Temp Up.    If your...

This part is a Overlay VL260 1 Pump Garden Leisure Large Oval 4 Button Balboa.  This is an oval overlay is 6 9/16" Long and 1 5/8" wide.  To the Right of the screen follows: Pump 1, Light, Temp Down and Temp Up.    If your overlay...

Balboa 4 button oval ML400 LCD topside controll panel with 8 pin molex plug. For use with the EL and GL series of spa packs and circuit boards. Can be used as the main or auxiliary control panel. Requires a 5.5" x 1.5" hole size Topside...

Two jet rectangular overlay sticker for the Balboa ML551 LCD topside control panel. Simple peel and stick application installs in minutes. Button Layout is: Jet 1, Jet 2, Light, Mode, Warm and Cool Manufacturer Balboa Water Group Model ML551 # of...

Rectangular 3 Jet overlay sticker for the Balboa ML551 topside control panel. Simple peel and stick application takes minutes to install. Can be used to replace overlays by various manufacturers. Button Layout is: Jet 1, Jet 2, Jet 3, Light, Mode, Warm...

ML551 rectangle topside control panel with 8 pin Molex connector for use with the Balboa EL and GL based spa packs and circuit boards. This part is only the base digital topside control panel. It doesn't include an overlay sticker to mark the buttons...

Balboa oval VL702S base topside control panel. This 7 button LCD topside control panel is used with the VS and GS spa packs and control systems. The base topside control will need an overlay to mark your buttons and keep the panel sealed. Overlay...

Overlay sticker for the oval Balboa TP600 tospide control panel. The buttons on this panel are marked as: Jet , Jet, Aux, Warm, Light, Cool and are used on 2 pump systems with a blower or even 3 pump systems. Mates to the topside control panel found...